How I removed crank w/o special tool.

[car5car]

1. Using drimel and sandstone I made a slight deep in the center of crank axle.
2. Put bike down on non-drive side.
3. Using rope hang your bike about 2-3 inches high above floor. Hook up rope on crank sprocket as close as possible to axle.
3. hold punch in the center of axle and hit it by hammer.


Disclaimer: for information purpose only, don't do it!!! I will not buy you a new bike and eyes!!!
How bike should be hanged



deep in the center of axle prevents punch slip.



I made a punch from a bolt and used vise-grips to hold it.

[Darrenjs92ni]

well its a better idea than what i done before i just hit the back of the crank with a hammer. It didn't work.

[Painkiller]

walmart online $8.00 site to store free shipping
it is illegal to lynch a bicycle where I come from

[car5car]

I forgot to mention that opposite bearing has to be partially removed.

[Bill]

Cool idea but as you said informational purposes !