Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.

New: Take part in the July Giveaway for a brand new 26" Thruster® Street Style BMX Cruiser Bicycle

New product launch: WIN an innovative aeroe Spider Rear Rack


Transferring cassette to hub help?
#1
I am replacing my rear wheel and need help figuring out how to move the cassette (the 5 sprockets) from my old wheels freehub to the new one. I see 2 indentations about an inch into the center hole, one of which you can see at 12 o'clock in the picture below, can I am thinking those are what I need to grab on to and turn but I do not know for sure. The only writing that I can see on the hub/cassette is "Shimano". No number or any other id.

[Image: 100_2451.JPG]

Thanks very much,
Jim Lee
  Reply
#2
Hi and welcome to the forums. Ok I borrowed your picture to asked you a couple questions. Where the left arrow points is it possible to get a closer view of that ring with a picture? You want to take the first five gears (cogs) off of this one to put on a new one? The other arrow shows where you may have to separate the freewheel/freehub off of this wheel if this is the one you are taking the gears off of.
If I am wrong in my understanding please do specify.
Good maintenance to your Bike, can make it like the wheels are, true and smooth!
  Reply
#3
(04-01-2011, 09:26 AM)sasjzl Wrote:  I am replacing my rear wheel and need help figuring out how to move the cassette (the 5 sprockets) from my old wheels freehub to the new one. I see 2 indentations about an inch into the center hole, one of which you can see at 12 o'clock in the picture below, cand I am thinking those are what I need to grab on to and turn but I do not know for sure. The only writing that I can see on the hub/cassette is "Shimano". No number or any other id.

Thanks very much,
Jim Lee

That ring on the outside needs to be removed to gain access to the 7 gear cassette you have. This can be done with the proper tool that inserts into the ring. That will allow the entire unit to come free.
  Reply
#4
This is a 7 speed cassette, older ones did have separate rings but they no longer do.
you need a cassette remover and a chain whip plus a spanner to fit the hex on the tool,
Insert the tool into the spline, hold the cassette with the chain whip and rotate the tool anti-clockwise, the lockring will unscrew and the cassette can be removed.
[attachment=2058]
[attachment=2059]
  Reply
#5
Most excellent.
I thank you all.

Jim Lee
  Reply


Possibly Related Threads...
Thread
Author
Replies
Views
Last Post
 
4,568
02-19-2014, 03:33 AM
Last Post: GeorgeET
 
16,630
12-12-2011, 03:41 AM
Last Post: Joe_W
 
20,424
06-06-2011, 05:28 PM
Last Post: 1FJEF
 
7,072
03-04-2011, 05:05 AM
Last Post: trevgbb

Forum Jump:

[-]
10 Latest Posts
FD cable pull on opposite side of frame
Today 01:00 AM
26" Thruster® Street Style BMX | July 20...
Yesterday 10:58 PM
Post a photo for aeroe Spider Rear Rack
Yesterday 10:47 PM
Creaky crank with play and loosening
Yesterday 06:36 PM
60s Viner Repainted..?
Yesterday 06:23 PM
budget speedometer
Yesterday 10:44 AM
2020 road cycling season
Yesterday 08:53 AM
Pinging noise fixed
Yesterday 08:08 AM
Need advice on Bike Rack
Yesterday 02:07 AM
RE: Merida Matts 6.5 Bicycle | June 2020...
07-07-2020 11:25 PM

[-]
Top 5 Posters This Month
no avatar 1. Jesper
69 posts
no avatar 2. CharleyFarley
19 posts
no avatar 3. Painkiller
15 posts
no avatar 4. Papa Dom
10 posts
no avatar 5. G_M
8 posts