Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.

New: Take part in the July Giveaway for an Electric Commuter Bike from KBO Bike


Difference in sprocket sizes
#1
Hello,
I want to change my 7 speed freewheel sprocket. It is 13-24 and is it ok to use a 14-28 or to stick to the same size as the original.
I am new to this but am newly obsessed with bikes and my house is full of them.
Many thanks
  Reply
#2
You will "probably" be O.K. with the 14-28.
The limiting factor is the clearance between the top jockey wheel of the dérailleur and the largest sprocket. Shimano road dérailleurs are only supposed to allow a maximum sprocket size of 27 teeth.
I currently run a Sora long cage mech' on a 13-28 but it is at the very limit.
MTB dérailleurs will clear anything up to 34/36 teeth.
The "B" screw on the dérailleur is there to allow adjustment of the jockey wheel clearance.
Ride hard or ride home alone!
  Reply
#3
Note that you will reduce your top gear ratio by about 7%, that is, you will travel c20" less in top gear for every rev of the pedals, this means you will be pedaling faster going downhill.
You will also reduce the bottom gear ratio by roughly the same and will find it easier going uphill.
  Reply
#4
Hiya thanks for the replies... most helpful!
  Reply


Possibly Related Threads...

Forum Jump:

[-]
10 Latest Posts
Sling Cycles Tagati
Today 07:10 AM
What are your best biking places in your...
Today 07:00 AM
One expensive lock vs two cheaper locks?
Today 02:12 AM
Question about Leg Shaving
Today 01:26 AM
Hallo..
Today 12:40 AM
COLNAGO SUPER (unknown year)
Yesterday 10:36 PM
Hello
Yesterday 12:44 PM
Hi
Yesterday 10:17 AM
Shifter Doesn't Have Clicking Sound
Yesterday 12:01 AM
Looking for reliable bikes for gf and me...
07-22-2021 09:03 PM

[-]
Top 5 Posters This Month
no avatar 1. Jesper
32 posts
no avatar 2. ReapThaWhirlwind
11 posts
no avatar 3. JR Namida
9 posts
no avatar 4. Zviedrs
6 posts
no avatar 5. Papa Dom
5 posts