Cantilever Brakes

ap9111993 · 10-18-2010, 01:24 AM

Hi
I've got a Ranger DTB of HERO company
My bike's one of the cantilever brake lost its torque to get its original position. could you please help me to repair the cantilever brake's spring

Anmol

Bill · 10-18-2010, 09:02 AM

You tried to see if it is just gunked up?

DaveM · 10-19-2010, 10:13 AM

If the brake's hanging to one side, first check to make sure the wheel is still centered. If it happened suddenly, you might check to make sure the spring didn't pop out of the retaining holes on the frame and brake arm. Also that nothing happened to the cable that might have tweaked it. After that, try the standard centering procedure. But if a spring is actually damaged, you can sometime bend them back into shape, but it's hard.

10 Latest Posts
Hello All 11-06-2026 09:03 AM
I don't usually wear a bike helmet. Does... 11-06-2026 02:48 AM
Chain skips under heavy load when pedall... 11-06-2026 02:44 AM
Are 26" really dying out? 11-05-2026 08:22 PM
Catastrophic bicycle failures 11-05-2026 08:15 PM
Our new review format – we'd like your f... 11-04-2026 05:51 AM
I've Switched To Flats... And You Should... 11-03-2026 04:46 PM
Hatch Chiles Rule! 11-03-2026 03:00 PM
Derailleur 11-02-2026 12:43 PM
Impromptu bikepacking/touring dilemma.. 11-02-2026 06:29 AM

Join BikeRide on Strava

Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom