Carbon bike, loose bottom bracket

Geocap · 07-22-2010, 05:22 PM

I have a carbon bike with a Campy Ultratorque crankset. There is a tiny amount of play between the bearing cups and bottom bracket shell. The bearing cups are tight, my only conclusion is that the aluminum sleeve not quite completely bonded into the shell. Can I lay in some epoxy resin to make a good repair?
Regards, George

Surly LHT · 07-22-2010, 10:06 PM

Can you post a few pic of that problem. It could be the BB is bad. Only if I had online eye site that I could see with lol JK But do look in to the BB first.

10 Latest Posts
Are you mainly into Mountain Biking, Roa... Yesterday 11:08 AM
Are 26" really dying out? Yesterday 11:02 AM
Wanted \| Magura Louse or Julie rear Yesterday 04:03 AM
Hatch Chiles Rule! 11-09-2026 04:56 PM
Should eBikers have to get an eBike lice... 11-09-2026 05:21 AM
How Bad Are E-bikes By You? 11-08-2026 10:29 PM
Shortness of breath. 11-08-2026 09:56 PM
Hello All 11-06-2026 09:03 AM
I don't usually wear a bike helmet. Does... 11-06-2026 02:48 AM
Chain skips under heavy load when pedall... 11-06-2026 02:44 AM

Join BikeRide on Strava

Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom