Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.


Brakes & levers
#1
When releasing my rear brake lever, brake pads do not release from rim, what adjustments do I need to make? I've original dura ace brakes - 2002 Trek 5900
  Reply
#2
Try undoing the cable from the caliper. If they pop open then, it means you have a stuck cable. If they still stay closed, the caliper is gunked up or needs adjustment on the pivots.
  Reply
#3
(07-15-2010, 07:46 PM)DaveM Wrote:  Try undoing the cable from the caliper. If they pop open then, it means you have a stuck cable. If they still stay closed, the caliper is gunked up or needs adjustment on the pivots.

Dave, your troubleshooting methods are always SUPERB! Smile

Steve
Junkyard Tools rescued from the junkyard!
  Reply
#4
10-4 to what Dave said........ And check the return spring on brakes, one side could have come loose or broke.
Never Give Up!!!
  Reply
#5
In addition to the above use a couple drops of triflow or the alike in the pivot arms.
Good maintenance to your Bike, can make it like the wheels are, true and smooth!
  Reply


Possibly Related Threads...

Forum Jump:

[-]
10 Latest Posts
New rider
Today 11:27 PM
Mountain Biking with or with out sunglas...
Today 11:23 PM
How Bad Are E-bikes By You?
Today 11:12 PM
Catastrophic bicycle failures
Today 11:08 PM
2007 Trek Pilot S.P.A. 5.2
Today 05:40 PM
I don't usually wear a bike helmet. Does...
Today 03:51 PM
Impromptu bikepacking/touring dilemma..
Yesterday 08:38 PM
Bmx with 26 inch wheels
Yesterday 05:50 PM
Gila Monster Gran Fondo
Yesterday 05:41 PM
Hatch Chiles Rule!
Yesterday 05:10 PM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. Flowrider
25 posts
no avatar 2. Sidewinder
23 posts
no avatar 3. GirishH
18 posts
no avatar 4. SPINMAN
12 posts
no avatar 5. Jesper
11 posts