Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.

New: Take part in the June Giveaway for a Foldylock Pride bike lock by Seatylock


Opinions re: bolt vs locking disc brakes on mtb's
#1
I'm looking to buy a replacement wheel set for my mtb which has hydraulic disc brakes.

I see there are different types of "disc attachment systems": a "shimano locking hub" style and the six bolted type [I forget the exact number of bolts]

any feelings on the two systems? Is one easier to maintain/install than the other? Does one system require less tools? [I'm a newbie to bike repair]

photos from park tools site

TIA!

Hawaii Mountainbiker

[attachment=961][attachment=962]
When u ride in a peloton of 1 you never get dropped...
  Reply
#2
Given that rotors wear and may need replacing I would probably stick with the cheaper and more widely available ISO 6 bolt.

Here are some pros and cons: http://www.feedthehabit.com/mountain-biking/disc-brake-rotors-shimano-centerlock-or-iso-6-bolt/

However, I'm not sure that I agree with the bad points for the 6-bolt system:

Bad 6-bolt

Can install rotors off-center - not by much if all the holes line up.

Removal for shipping is cumbersome - how often do you need to do that?

Risk of stripping a bolt - You can strip any thread on any component if you're ham-fisted enough, if you do this often, invest in a torque wrench and follow the manufacturers guide-lines.

Multiple points of failure (6 bolts) - You could also say that there are 5 back-ups if one bolt fails.
  Reply
#3
^ I fully agree with xerxes

Centre-lock hubs are not very common at all, so finding a decent set of wheels becomes much harder. I've also never seen a rotor bolt fail, just what a bit of blue threadlock on them before you install (If it doesn't come with it already) and you'll be fine.

On the subject of new wheels if you're into harsh trails (I'm assuming you are if you've got hydros) I'd see if you can get some Hope hubs (not sure if you can get them in the states). They're a little more expensive but they last forever. They're also cartridge bearing so the hub doesn't wear out.
  Reply
#4
(06-02-2010, 06:37 AM)JonB Wrote:  ^ I fully agree with xerxes

Centre-lock hubs are not very common at all, so finding a decent set of wheels becomes much harder. I've also never seen a rotor bolt fail, just what a bit of blue threadlock on them before you install (If it doesn't come with it already) and you'll be fine.

On the subject of new wheels if you're into harsh trails (I'm assuming you are if you've got hydros) I'd see if you can get some Hope hubs (not sure if you can get them in the states). They're a little more expensive but they last forever. They're also cartridge bearing so the hub doesn't wear out.

Thanks to both of you for the reply! I'll go for the traditional set up I'm not into a system that is not widely available.
When u ride in a peloton of 1 you never get dropped...
  Reply


Possibly Related Threads...
Thread
Author
Replies
Views
Last Post
 
11,684
03-11-2011, 05:31 AM
Last Post: The walrus

Forum Jump:

[-]
10 Latest Posts
How to keep your bicycle safe?
Yesterday 11:58 AM
How often do you use suspension fork loc...
Yesterday 09:53 AM
what is good length for a folding lock?
Yesterday 09:44 AM
Star blubike lube
Yesterday 09:42 AM
It's here! Biking Down a Volcano at 58mp...
Yesterday 09:28 AM
2021 Pro Road Cycling
Yesterday 09:27 AM
Ethical Dilemma
06-18-2021 09:43 PM
Champagnolo Say None of Their Cranksets ...
06-17-2021 08:06 PM
CHANGING 1x8 into 2x8
06-17-2021 01:38 PM
Creaking/clicking when putting heavy loa...
06-17-2021 08:25 AM

[-]
Top 5 Posters This Month
no avatar 1. ReapThaWhirlwind
46 posts
no avatar 2. Jesper
20 posts
no avatar 3. JoJoJo
11 posts
no avatar 4. Zviedrs
10 posts
no avatar 5. iemand85
7 posts