Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.


Total newbie question
#1
Hello everyone,

So at the risk of showing myself to be a total bike nerd, I really have to ask this question:

When I coast my bike, the rear derallieur makes ticking sound (which is one of my favorite sounds ever)(see, I told you I could be a nerd), but my friend's bike doesn't. Why is that?

Thanks!
  Reply
#2
Depends on the make of the hub.
Shimano tend to be quiet whereas Campagnolo really tick. My Mavic can be heard 3 streets away. (only joking but it is very loud.)
Some Shimano hubs used to use a different set up and can't be heard at all.
Ride hard or ride home alone!
  Reply
#3
It's the hub rather than the derallieur, and as cyclerUK said it depends on the hub. There's usually some form of "clicky noise," but tyre roar can drown it out if it's a quiet hub (pick the back end up and spin it).

If you really like loud hubs see if you can get hold of a Hope hub, particularly the Pro II (not sure if you can get them in the states, they're made in the UK). They're an MTB hub though, but they have one of the loudest clicks out there. They're also virtually indestructible and are so well made they rarely fail (almost everyone runs them for Downhill, and I've only ever heard of three fail, all were due to defects in manufacturing).
  Reply
#4
(05-14-2010, 03:36 PM)cyclerUK Wrote:  Depends on the make of the hub.
Shimano tend to be quiet whereas Campagnolo really tick. My Mavic can be heard 3 streets away. (only joking but it is very loud.)
Some Shimano hubs used to use a different set up and can't be heard at all.

I have a Shimano 105 drivetrain, but I'd have to go look at the hub. The bike specs say "aluminum" which isn't terribly helpful. I just think it's interesting, because until recently, I thought all bikes made ticking sounds when not being pedaled.

Patty
(05-14-2010, 05:21 PM)JonB Wrote:  It's the hub rather than the derallieur, and as cyclerUK said it depends on the hub. There's usually some form of "clicky noise," but tyre roar can drown it out if it's a quiet hub (pick the back end up and spin it).

It's not quiet at all, but I've heard noisier ones. As Goldilocks says, it's just right. Oh, maybe that's the bear. Big Grin

Anyway, until I realized that my friend's bike is quiet when she's not pedaling, I never thought about it.

Thanks!
Patty
  Reply
#5
Just a note some sound the same no if it is a Freewheel or Freehub Wink . As long as you do not hear grinding sounds your ok hahaha.
Good maintenance to your Bike, can make it like the wheels are, true and smooth!
  Reply


Possibly Related Threads...
Thread
Author
Replies
Views
Last Post
 
7,549
04-28-2020, 06:00 PM
Last Post: Zviedrs
 
32,804
06-10-2010, 01:27 PM
Last Post: damian
 
12,160
06-01-2010, 12:18 AM
Last Post: BikeCrazyAgain
 
14,809
01-17-2010, 09:59 AM
Last Post: KDC1956
 
8,957
11-04-2008, 11:54 PM
Last Post: Dana

Forum Jump:

[-]
10 Latest Posts
Your next ebike could have two motors, b...
Today 07:09 PM
How Bad Are E-bikes By You?
Today 07:01 PM
Shortness of breath.
Today 06:56 PM
Are you mainly into Mountain Biking, Roa...
Today 06:54 PM
Hatch Chiles Rule!
Today 05:29 PM
Are 26" really dying out?
11-11-2026 11:02 AM
Wanted | Magura Louse or Julie rear
11-11-2026 04:03 AM
Should eBikers have to get an eBike lice...
11-09-2026 05:21 AM
Hello All
11-06-2026 09:03 AM
I don't usually wear a bike helmet. Does...
11-06-2026 02:48 AM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. Flowrider
22 posts
no avatar 2. meamoantonio
11 posts
no avatar 3. ReapThaWhirlwind
11 posts
no avatar 4. Sidewinder
8 posts
no avatar 5. GirishH
8 posts