GT Triple Triangle?

Bill · 09-07-2012, 09:58 PM

Ok I'll definitely go with dh13 for the drive aside rear and ss14 for the non drive side and full front wheel build. So the measurement for order is 2.5 mm diameter and 263mm length for the non drive side and 2.5 diam x 262 length drive side?
I'll do the front hub tomorrow because it is late.

Bill · 09-07-2012, 11:21 PM

Ok I'll definitely go with dh13 for the drive aside rear and ss14 for the non drive side and full front wheel build. So the measurement for order is 2.0 mm diameter and 263mm length for the non drive side and 2.0 diam x 262 length drive side?
I was looking at the SS14 spokes and was wandering if I went with them all the way round would that create a problem. I am only 170lbs on my fat days lmao.

Ok I just tried to post and this is not letting me?

Bill · 10-05-2012, 12:11 AM

Details are included in Part #2

Bill · 10-10-2012, 08:18 PM

THIS BIKE IS NOW DONE! LOOK AT THREAD "GT Triple Triangle? Part. 2" for final results!

10 Latest Posts
Tour of Luzon 70 years of Filipino Cycli... Today 01:22 AM
What are the best cost effective ways to... Today 01:19 AM
RECOMMENDATION Today 01:04 AM
Injury Recovery Yesterday 07:33 PM
Good morning form Alberta CA Yesterday 09:40 AM
Unlocking speed on my e-bike. 04-27-2025 01:04 PM
MTB handlebar width 04-27-2025 06:25 AM
What is your favorite MTB trail/route in... 04-27-2025 06:16 AM
Bridgestone Blouson bike. 04-26-2025 07:57 PM
Thoughts on paceline riding 04-26-2025 05:51 PM

Join BikeRide on Strava

Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom