01-15-2010, 04:33 PM
Jeez. Could you have asked a question that had more answers?
(And these are only bike related!)
1. Stripping paint off frame.
2. Drilling hole in frame for rivnut for water bottle cage.
3. Grinding down weld on homemade truing stand.
4. Buffing frame to mirror finish.
5. Cut off top tube, downtube, and rear triangle for truing stand.
6. Buffing JB Weld.
7. Cutting seat post free from stripped bolt.
Holy crap, this is in the last week.
Do yourself a favor and get a large bit set, and you'll use it for everything.
(And these are only bike related!)
1. Stripping paint off frame.
2. Drilling hole in frame for rivnut for water bottle cage.
3. Grinding down weld on homemade truing stand.
4. Buffing frame to mirror finish.
5. Cut off top tube, downtube, and rear triangle for truing stand.
6. Buffing JB Weld.
7. Cutting seat post free from stripped bolt.
Holy crap, this is in the last week.
Do yourself a favor and get a large bit set, and you'll use it for everything.
Dedicated scholar of bicycles
![[-]](https://forums.bikeride.com/images/flatty/collapse.png "[-]")
