Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.

New: Take Part in the October Giveaway to Win the Qiolor TIGER Retro Electric Bike


When changing gears in some gears they skip
#1
I have this bike with a front and rear derailleur Shimano 105 and with a pedalier SRAM red

And when going from 2nd to 3rd instead of changing to 3rd it skips it and changes to 4 it also happens with 6th and 9th any ideas why?
  Reply
#2
SRAM and Shimano have different pull ratios for 9 speed and beyond. I do believe they were once interchangeable with 7 and 8 speed.

You will need a 9 speed Shimano shifter to use the 9 speed Shimano rear derailleur properly.

You will specifically need a 9 speed one, because Shimano 9 speed spacing is proprietary to the group class.

5~8 speed spacing is the same, and thus you can use an 8 speed derailleur for a 7 speed cassette. 10 and 11 speed the same (since spacing is the same between them as well).

Not 9 speed though. It's unique unto itself, and the only components you can mix are crank chainrings.

And you can use higher speed chains on a 9 speed setup, if say you want to run a 10 speed cassette with a 9 speed crank. In this case, you'll need a 10 speed chain, shifter, and derailleur to navigate the cassette properly. And the 10 speed chain will be fine on the 9 speed crank, so long as the front derailleur also matches the chain (so it doesn't rub on the cage).

You cannot run lower speed chains on higher speed cranks or setups, because they are too thick and will disrupt the precision elements.

If you get skips like this any other time, it will generally mean there is too much tension on the cable. You need to dial in the barrel adjuster and/or re-fix the cable to the rear derailleur with less pre-tension in it.
  Reply
#3
(08-03-2021, 09:03 PM)DamiBa01 Wrote:  I have this bike with a front and rear derailleur Shimano 105 and with a pedalier SRAM red

And when going from 2nd to 3rd instead of changing to 3rd it skips it and changes to 4 it also happens with 6th and 9th any ideas why?

You didn't mention what type of shifters you have. The previous post is correct about mixing and matching shifters given different speed cassettes. The SRAM Red crankset should not affect it as far as I know. It is possible that your indexing system is not set up properly, or as previously stated is not compatible with the shifters themselves.
Take care,
Jesper

"I am become Death, the destroyer of bicycles." NJS
  Reply


Possibly Related Threads...
Thread
Author
Replies
Views
Last Post
 
13,086
10-17-2021, 06:05 PM
Last Post: alr
 
2,450
07-25-2021, 05:51 PM
Last Post: Pedroglobal
 
5,496
12-01-2020, 02:10 AM
Last Post: Jesper
 
5,690
05-10-2020, 10:03 AM
Last Post: CharleyFarley
 
5,820
04-20-2020, 08:56 AM
Last Post: Jesper
 
5,828
08-06-2019, 10:24 AM
Last Post: Painkiller
 
3,954
04-07-2019, 12:00 AM
Last Post: dwc7
 
10,208
03-18-2017, 09:35 PM
Last Post: Painkiller

Forum Jump:

[-]
10 Latest Posts
Schwinn trike NOISE
Today 05:20 PM
Schwinn meridian rear drive axle
Today 04:36 PM
What was your first bicycle?
Yesterday 04:11 PM
Great UK Cycle Camping Map, For E-Bikes,...
Yesterday 05:38 AM
Charging at campground
Yesterday 05:33 AM
Failure to stop at stop sign means $500 ...
Yesterday 05:27 AM
Bicycle enthusiast located in California
Yesterday 04:15 AM
Moving in Style: Beyond Regular Transpor...
Yesterday 01:29 AM
Do you plan or random ride your MTB ride...
11-02-2024 11:43 AM
Cycling is Anti-Aging, But There's a Cat...
11-02-2024 11:36 AM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. Jesper
18 posts
no avatar 2. enkei
18 posts
no avatar 3. GirishH
13 posts
no avatar 4. Flowrider
12 posts
no avatar 5. Talha
10 posts