Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.


Cassette Installation Question
#1
I had a question about reinstalling the rear cassette on my road bike after deep cleaning it in degreaser.

When I removed the cassette I noticed something also bounced on the floor and by making a metal "ping" sound. I noticed what looked like a metal spacer on the ground nearby it measures 1.75-1.85 mm thick. (Pictured on the left below.)

   

I didn't see where this spacer was prior to removal, so I am not certain how to reinstall it. Am I correct that it should sit behind the rear cassette and go on freehub first?

   

Please let me know if I reinstalled my cassette correctly by putting the spacer on first.


I also noticed this spacer also went on more than just "one way" unlike the rest of the cassette. I am guessing that is okay due to it just being a spacer.


Thanks for your time!
  Reply
#2
Check if there is one missing between the sprockets, normally a 9 speed (did I count correctly?) cassette doesn't need one. Except on 11spd hubs, I believe. But quite likely you are right.
  Reply
#3
(07-30-2019, 07:26 AM)Joe_W Wrote:  Check if there is one missing between the sprockets, normally a 9 speed (did I count correctly?) cassette doesn't need one. Except on 11spd hubs, I believe. But quite likely you are right.

Thank you, yes you did count correctly with the 9 speeds. I am guessing it is an 11-speed hub as the manufacturer makes this bike with an 18, 20, and 22-speed variants respectively, they probably all use an 11-speed hub and add spacers for 10 and 9-speed cassettes. Thanks again!
  Reply
#4
(07-31-2019, 01:58 AM)Buccafresh Wrote:  
(07-30-2019, 07:26 AM)Joe_W Wrote:  Check if there is one missing between the sprockets, normally a 9 speed (did I count correctly?) cassette doesn't need one. Except on 11spd hubs, I believe. But quite likely you are right.

Thank you, yes you did count correctly with the 9 speeds. I am guessing it is an 11-speed hub as the manufacturer makes this bike with an 18, 20, and 22-speed variants respectively, they probably all use an 11-speed hub and add spacers for 10 and 9-speed cassettes. Thanks again!

That explains it... I'm stuck in the past with my (current) hubs, so I have yet to encounter them. One rule about bike fixing (ok, for me) is to just try stuff. Unless you use excessive force most things don't break... Sometimes you have to start from square one again, though.
  Reply


Possibly Related Threads...
Thread
Author
Replies
Views
Last Post
 
2,738
10-01-2023, 06:27 AM
Last Post: ichitan
 
12,987
05-17-2013, 12:22 PM
Last Post: nfmisso
 
9,767
09-23-2011, 11:39 AM
Last Post: sjta66
 
26,367
07-07-2009, 07:23 PM
Last Post: DaveM
 
10,692
02-06-2009, 06:19 PM
Last Post: Alex Ramon

Forum Jump:

[-]
10 Latest Posts
Thoughts on tariff effects on the cyclin...
Today 11:06 AM
braking by reversing the pedals
Today 10:15 AM
Post-Ride Nutrition
Yesterday 02:06 AM
🚴‍♂️ Saddle Up for the Belgian Waffle Ri...
Yesterday 02:03 AM
Pre Ride Food Intake
Yesterday 12:14 AM
SAVA Explorer 6061?
04-02-2025 03:31 PM
Zwift v Spin v Wahoo
04-01-2025 05:59 PM
Have you Ever Tried an Electric Bike?
04-01-2025 05:07 PM
Good Morning from SW Ohio
04-01-2025 07:32 AM
(So California) PV Dr to be closed to bi...
03-31-2025 09:14 PM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. GirishH
22 posts
no avatar 2. Flowrider
18 posts
no avatar 3. meamoantonio
12 posts
no avatar 4. Jake1
12 posts
no avatar 5. SPINMAN
8 posts