Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.

New: Take Part in the October Giveaway to Win the Qiolor TIGER Retro Electric Bike


Awkward bolts!
#1
Been trying to remove the cranks in order to replace the bottom bracket, after much effort I managed to remove one side, however despite being careful the thread inside the other one has 'rounded-out', meaning the allen key just spins round. There's not much room to drill a bigger hole or anything like that, but I can't figure out how to remove the darn thing now. Any ideas?
Cheers
Return of the Mech
  Reply
#2
Photos would be a big help here.

I think you are trying to remove the crank bolt , that's the only allen head I can visualize.
Never Give Up!!!
  Reply
#3
Yes that's right - I'll aim to post some photos shortly
Return of the Mech
  Reply
#4
[attachment=4256][attachment=4257]
Return of the Mech
  Reply
#5
Cannot tell too much from photos but at least we know what bolt you are talking about. Spray some good penetrating oil in there , do not know where you are so do not know brands, put bicycle on side and let the bolt soak overnight.
There are abrasive compounds you can put into the bolt head and that would help the allen wrench grab. Otherwise you can use a small sharp cold chisel maybe even a screwdriver that fits tightly and need to be forced in with taps from hammer than grab that with a wrench or pliers and try that. You do have a crank puller?
Once the bolt is mangled its pretty much a destracto job to get it out.

You could also drill the head off if the above fails. Just drill straight in till the head can be collapsed. You can use progressively bigger drill bits.Not fun...
Never Give Up!!!
  Reply
#6
Use a big bolt extractor... Use a Vise-Grip with it...

http://m4.uxcell.com/photo_new/20080929/c/ux_a08092900ux0077_ux_c.jpg
  Reply
#7
(06-17-2013, 07:55 PM)bobtravers Wrote:  Use a big bolt extractor... Use a Vise-Grip with it...

http://m4.uxcell.com/photo_new/20080929/c/ux_a08092900ux0077_ux_c.jpg

Yes easy out will work too, if you have a set . You first need to drill a center hole screw easy out in clockwise and unscrew bolt CCW. They are very hard therefore easy to break . No side forces.

Since you have the other bolt out that would give you an idea of how big an easy out you need. Smaller than the bolt.
Never Give Up!!!
  Reply


Possibly Related Threads...
Thread
Author
Replies
Views
Last Post
 
8,190
10-07-2012, 11:00 AM
Last Post: Bill
 
11,234
12-30-2009, 07:11 PM
Last Post: DaveM

Forum Jump:

[-]
10 Latest Posts
Moving in Style: Beyond Regular Transpor...
Yesterday 09:11 PM
Great UK Cycle Camping Map, For E-Bikes,...
11-10-2024 06:55 AM
Cycling is Anti-Aging, But There's a Cat...
11-10-2024 06:48 AM
BAGGI 1936(?)
11-09-2024 10:24 AM
Do you have a four foot rule?
11-09-2024 10:10 AM
Trek domane tyre
11-08-2024 05:07 PM
Greetings!
11-08-2024 04:39 PM
Peugeot Nouveau Folder
11-08-2024 04:34 PM
Community Discussion Cycling Myths
11-07-2024 09:05 PM
Tasmania! Anyone ridden here?
11-07-2024 05:15 PM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. enkei
22 posts
no avatar 2. GirishH
17 posts
no avatar 3. Jesper
16 posts
no avatar 4. Flowrider
14 posts
no avatar 5. Talha
10 posts