Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.

New: Take Part in the new April's Giveaway for a Chance to Win the Euybike S4 Pro Max ebike worth $1299


wheel rim repair
#1
                   
Hello
my first post!
Very unlucky to get a serious tyre/wheel puncture - see attachments.
Cycling on edge of fa busy flat road following the double yellow line when a steel hexagonal shaft entered the back wheel. Only motoring about 10 mph.
No sharp end and how it entered the tyre, then wheel is a mystery. Thought I had a mechanical frame breakage. The shaft went through the tyre and then through the bike wheel. This caused the shaft to penetrate out 50mm and hit the back frame a few times.
I can will replace inner tube and patch the tyre, but what suggestions to repair the wheel?
Still runs true, no spoke damage, and the hole does not interfere with the brake block surface.
kind regards
Richard ,
  Reply
#2
(08-16-2021, 07:30 AM)Mr D Wrote:  Hello
my first post!
Very unlucky to get a serious tyre/wheel puncture - see attachments.
Cycling on edge of fa busy flat road following the double yellow line when a steel hexagonal shaft entered the back wheel. Only motoring about 10 mph.
No sharp end and how it entered the tyre, then wheel is a mystery. Thought I had a mechanical frame breakage. The shaft went through the tyre and then through the bike wheel. This caused the shaft to penetrate out 50mm and hit the back frame a few times.
I can will replace inner tube and patch the tyre, but what suggestions to repair the wheel?
Still runs true, no spoke damage, and the hole does not interfere with the brake block surface.
kind regards
Richard ,

Hello Richard,

My opinion is that the rim is FUBAR! The integrity of the rim would be highly suspect even with it still being true and not affecting the braking track (look closely at the cracks; great photo). Wish I had better news. Replace the rim (rebuild the wheel); or replace the whole wheel. The culprit part is an extension piece for a driver toolset. You were VERY unlucky to have it cause the damage that it did; most of the time you would just run over something like that and never look back. Ensure your frame is not damaged other than aesthetically. I hang those types of damaged parts on the "Wall of Shame" to remind me to be more careful.
  Reply
#3
It's your lucky day!

You get a brand new wheelset!
  Reply


Possibly Related Threads...
Thread
Author
Replies
Views
Last Post
 
8,352
09-01-2015, 07:29 PM
Last Post: DaveM

Forum Jump:

[-]
10 Latest Posts
Pogačar's 2024 dominance
Today 02:32 AM
Crank arm length
Today 02:28 AM
2011 GT Tachyon upgrade/mod
Today 02:23 AM
Hello, from Friendly Manitoba
Today 02:20 AM
Doctors are Prescribing Cycling
Yesterday 02:34 AM
Greetings!
Yesterday 02:30 AM
🚴‍♂️ Saddle Up for the Belgian Waffle Ri...
04-10-2025 11:05 PM
What is the best Mountain Bike you've ev...
04-10-2025 12:40 PM
braking by reversing the pedals
04-10-2025 08:34 AM
Giant reporting profits are 60% down
04-10-2025 08:32 AM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. GirishH
22 posts
no avatar 2. Flowrider
19 posts
no avatar 3. meamoantonio
15 posts
no avatar 4. Jake1
14 posts
no avatar 5. SPINMAN
9 posts