Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.


Front Derailleur Stuck
#1
Hi all,

Firstly I'm kind of new to cycling so bare with me.

I really wanted to get into cycling during lockdown and ordered a bike online and had to build it myself.

I wanted a road bike and I didn't really want to build it but due to so many people getting into cycling this was my only option.

The problem is that my front derailleur cage is catching on the gears and it means I can't peddle. I can't adjust the gears from the handle bars and I really don't know what to do. I have attached a picture of the cage.


Attached Files Image(s)
   
  Reply
#2
(07-22-2020, 08:59 AM)Matt F Wrote:  Hi all,

Firstly I'm kind of new to cycling so bare with me.

I really wanted to get into cycling during lockdown and ordered a bike online and had to build it myself.

I wanted a road bike and I didn't really want to build it but due to so many people getting into cycling this was my only option.

The problem is that my front derailleur cage is catching on the gears and it means I can't peddle. I can't adjust the gears from the handle bars and I really don't know what to do. I have attached a picture of the cage.

Welcome Matt,

I appears that you have a tube clamp-on Front Derailleur (FD). Loosen FD clamp bolt and carefully slide it up the seat tube. I set my cage so that it is approx. 1/16" above the largest sprocket during shift up/down conditions. You will probably need to readjust the front indexed shifting. Take out any cable slack which was just introduced by moving the FD upwards on the seat tube. "Trim" the FD cage position so that it is optimally aligned in the gear/gear range most commonly used. The FD has some "leeway" as to where the cage aligns to on a specific "click". Your most common chainline should dictate the fine tuned adjustment for your personal riding habits, which might be significantly different from my settings if I was on your bike.

Edit: Also ensure that the cage is not hitting the chainwheel guard. The cage should be aligned fairly straight front to back. If you are hitting the guard with proper alignment, then you will need too adjust the high limit screw (turn it in a little) so that it keeps the cage from interfering with the guard. The guard itself is not necessary, but still offers protection from your leg/ankle from contacting the chain or clothes from getting caught in the chain.
  Reply


Possibly Related Threads...

Forum Jump:

[-]
10 Latest Posts
Good Morning from SW Ohio
Today 07:32 AM
(So California) PV Dr to be closed to bi...
Yesterday 09:14 PM
🚴‍♂️ Saddle Up for the Belgian Waffle Ri...
Yesterday 08:34 AM
Tubeless vs. tubes: What are the pros an...
Yesterday 08:28 AM
The great thing about trikes
Yesterday 08:16 AM
Injury Recovery
Yesterday 08:06 AM
Fellow cyclists, we need your help! Plea...
Yesterday 08:01 AM
New member old rider
Yesterday 07:54 AM
Post-Ride Nutrition
Yesterday 07:52 AM
Pre Ride Food Intake
Yesterday 05:53 AM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. GirishH
19 posts
no avatar 2. Flowrider
17 posts
no avatar 3. meamoantonio
12 posts
no avatar 4. Jake1
10 posts
no avatar 5. enkei
9 posts