Schwinn Meridian Rear Wheel Bearings

Tyro65 · 04-08-2017, 05:26 PM

I think the rearing bearings are 13mm ID and 30mm OD. Are these measurements correct? Please help.

Thanks.

Painkiller · 04-08-2017, 08:20 PM

You need the bearing size too. Go to hardware store or bike shop to have them matched up. Anywhere that sells caged bearings. If you know your ball size, you can pack without the cage (Loose) and add one extra ball per race.

10 Latest Posts
New rider 10-02-2026 11:27 PM
Mountain Biking with or with out sunglas... 10-02-2026 11:23 PM
How Bad Are E-bikes By You? 10-02-2026 11:12 PM
Catastrophic bicycle failures 10-02-2026 11:08 PM
2007 Trek Pilot S.P.A. 5.2 10-02-2026 05:40 PM
I don't usually wear a bike helmet. Does... 10-02-2026 03:51 PM
Impromptu bikepacking/touring dilemma.. 10-01-2026 08:38 PM
Bmx with 26 inch wheels 10-01-2026 05:50 PM
Gila Monster Gran Fondo 10-01-2026 05:41 PM
Hatch Chiles Rule! 10-01-2026 05:10 PM

Join BikeRide on Strava

Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom