Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.

Best Black Friday E-Bike Deals 2024 | Up to $1,700 in Savings

New: Take Part in the November Giveaway: Starts November 18th


Lockring stuck on bracket Cup
#1
Hey,

I am trying to restore an old 1955 Triumph that I bought at a car boot sale. I was removing the bottom bracket today and have been having a problem removing the lock ring. I was using a hammer and punch to turn the lock ring (it was very stiff). Once it was loose I managed to remove it almost completely before it got stuck again. When I resumed using the hammer and punch I ended up just loosening the bracket cup which has now come free with the lock ring still attached.. I can get the cup back on but the lock ring doesn't go flush and I am concerned it will not be properly sealed.

Apologies if this isnt clear but I have attached a photo to make it clearer hopefully!

[Image: IMG-20141023-WA0001.jpeg]

Thanks,
Sam
  Reply
#2
You definitely need to get the lock ring moving so you can adjust the BB when you put it back together. You could try soaking the whole thing in a rust breaker like PB Blaster. If you can get the lockring moving back deeper onto the cup, you may be able to screw it all the way off to the inside instead. It may be that the outer threads are damaged rather than rusted and that is why it is binding.

Last resort could be to carefully cut the lockring with a hacksaw. You should be able to do this with minimal damage to the threads on the cup. Of course, you would need a new lock ring. But you should be able to find something that at least looks similar. (Unless this has some weird English threading?)

I'd be careful about clamping this in any way as your try to work it off, you don't want to crush the cup.

Have a shop chase the threads on the frame before you reassemble.

(This all assumes the cup itself isn't pitted on the inside. If it is, you either need to try to polish the bearing surface or make a decision about replacing it anyway.)
  Reply
#3
Hey,

Thanks for the quick reply. I will leave it soaking over night and see if that helps. I am concerned that it has slipped and so soaking wont help. It was slightly loose when I was trying to remove the pedal crank and I think it may have got bumped slightly :S

Time will tell.

Thanks again.
  Reply
#4
If soaking in solvent does not work, try Oxalic Acid; in the USA most automobile parts stores have, it is a rust remover. http://en.wikipedia.org/wiki/Oxalic_acid
Nigel
  Reply
#5
You might want to clean and inspect the cup to make sure it's good enough to reuse, lest you put in a lot of work for nothing. Of course if it is bad it will be a challenge finding a compatible cup, as the old English 3 speeds used different threading (26 tpi). You are essentially relegated to trying to scavenge some. Even back in the 70's the cups were hard to find.
  Reply


Possibly Related Threads...
Thread
Author
Replies
Views
Last Post
 
5,448
10-17-2022, 08:14 PM
Last Post: Jesper
 
2,958
10-22-2020, 09:29 PM
Last Post: Mike L
 
8,036
02-06-2016, 07:17 PM
Last Post: Lighttower
 
12,027
05-19-2015, 08:48 AM
Last Post: alexwang32
 
9,015
02-19-2014, 03:33 AM
Last Post: GeorgeET
 
10,288
06-01-2013, 06:58 PM
Last Post: Painkiller
 
50,508
10-21-2012, 07:19 AM
Last Post: FredS
 
26,848
02-20-2012, 10:46 PM
Last Post: ghost
 
9,721
10-26-2011, 11:43 AM
Last Post: chibler

Forum Jump:

[-]
10 Latest Posts
Moving in Style: Beyond Regular Transpor...
Yesterday 10:07 PM
Tasmania! Anyone ridden here?
Yesterday 06:17 PM
Cycling is Anti-Aging, But There's a Cat...
Yesterday 06:15 PM
What was your first bicycle?
Yesterday 08:06 AM
need e-trike advice (wife knee surgery)
11-23-2024 07:59 PM
Second wheelset for ebike.
11-22-2024 01:41 AM
Tire Sizing (Or How to Buy A Tire)
11-21-2024 12:36 PM
The Roaming Radrunner Vlog 1 Why ride ...
11-21-2024 09:17 AM
Recording Bike Rides
11-20-2024 01:37 AM
Ketone Ester $$$
11-19-2024 01:04 AM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. Jesper
20 posts
no avatar 2. GirishH
14 posts
no avatar 3. Flowrider
11 posts
no avatar 4. ReapThaWhirlwind
11 posts
no avatar 5. Talha
10 posts