Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.

New: Take Part in the Latest Giveaway coming soon


Cane Creek AD-10 rear shock service/repair - rebound knob broken
#1
Hi there, I have a specific question regarding a Cane Creek AD-10 rear shock on my Santa Cruz Superlight (not that it matters what frame it's strapped to). Anyway, I broke off the rebound knob/screw flush inside the valve/threads. The knob itself is like a little allen screw with a small o ring on the inboard side. My question is assuming that I can find a creative way to remove the screw... it will be tough as it's very small so even drilling it out will likely require my drill press, a jeweler's bit and a few wobbly pops...

Ok back to the question... Does anyone know if these screws can be substituted or purchased from a parts warehouse, etc? I haven't been able to find anything listed under 'Problem solvers' or that nuts and bolts place that seems to have everything. Cane Creek hasn't been much help and I have also spoken with Push Industries but they don't service CC products so were unable to speculate either.

I am thinking that once it's removed, I will pull the compression knob out and measure the pitch and thread count and THEN source the replacement. I could leave it as is but I want to fix it and I can't bring myself to dumping this shock as it's been great (other than this problem which by the way didn't happen as a result of being forced). I simply adjusted the rebound and it snapped off. I used my fingers...

Any help would be appreciated especially if you've ever torn down a CC rear shock.

Thanks,
Andrew.
  Reply
#2
I feel absolutely terrible having said any poor words on Cane Creek wanting to help me. I must have emailed the wrong guy or perhaps I wasn't clear enough on what I needed help with. I just got off the phone with Eric from their technical department and he was great to deal with. He said that he would rebuild and upgrade the shock to a AD-12 for a minimal fee or he would see if he could find the parts for me (he had nothing showing on his inventory at a glance but wanted to help me further). I gave Eric may ph# and he said he would call me right back. We all know what this could mean based on similar situations. Good to his commitment and reaching far beyond my expectations, he called me back in about 2 minutes! He took my address and said he would mail out a bunch of adjuster screws for me today. This is very exceptional customer service and I wouldn't hesitate to continue to support Cane Creek going forward. I have their headsets (2), rear shock, some canti road brakes, and some hubs as I recall. So far, the only issue I have had is with this shock and seeing it's five years old, their resolution was outstanding.

Hats off to Eric and the good folks at CC! They really impressed me today.

Andrew.
  Reply


Possibly Related Threads...

Forum Jump:

[-]
10 Latest Posts
Lectric One
Yesterday 09:58 PM
Cycling in the Wind
Yesterday 03:45 PM
Do you have a four foot rule?
Yesterday 12:49 PM
What New Year's Cycling Resolutions Do Y...
Yesterday 10:58 AM
E-Bike with my camera
04-16-2024 09:47 PM
Tyres keep popping off wheels...
04-16-2024 04:45 PM
Saronni Colnago Critrium Frame set
04-16-2024 03:26 PM
Rear hub issue
04-16-2024 04:18 AM
Vintage (and mint) Torelli...unknown yea...
04-16-2024 12:43 AM
Decision-Decisions
04-15-2024 06:21 PM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. Jesper
27 posts
no avatar 2. enkei
26 posts
no avatar 3. Frankly
20 posts
no avatar 4. Painkiller
15 posts
no avatar 5. meamoantonio
12 posts