Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.

New: Take part in the August Giveaway for a brand new Street Bicycle Core Line fixed gear bike


First bike restore... pedal crank issue, see pics
#1
[attachment=4547]CHAD BRIZENDINE <mrliveanimal@gmail.com>

This is a vintage Raleigh Spirit which i found in a dumpster. The wheels were flat ( I thought they were junk but I guess they're in great almost new condition) the rear break mechanism was missing and the rear break wire was rus[attachment=4548][attachment=4549]ted off. I fix these things and I few other small things. I have the fenders which I have yet to install. My issue is with the pedals, which were loose. I tightened them but they worked loose and after doing this twice, the bolt on the right crank completely broke off with the nut and all

the pedals were loose, then yesterday when i restored the bike i tightened them up but they quickly work themselves loose again. Then, today, i tighten up those bolts again and one almost seemed striped, it probably was because I just noticed that it complately fell off, or not even worked itself off but the actually bolt broke off. you can see that the bolt doesnt even extend out of its hole, so i assume that the bolt has essentially broken in half. I don;'t know how to go about fixing this so any suggestions would be helpful
  Reply
#2
what is your budget and your intentions - restoration or reliable rider?

I always go with the reliable rider.

You have what are called cottered cranks. I would replace the crankset with cotterless.

Something like this:
http://www.amazon.com/Sunlite-Crankset-Cotterless-44x170-Silver/dp/B000AO9YWQ/

and you also need a new BB like this:
http://www.amazon.com/VP-Track-Bottom-Bracket-68x107mm/dp/B005LA918Q/

and bolts
http://www.amazon.com/XLC-Head-Crank-Bolts-15mm/dp/B0043MQV2W/
Nigel
  Reply
#3
Does he mean there is a bolt in the crank where it meets the spindle, & that it's broken off inside the crank? So someone has put a nut & bolt where the pin should be in the crank arm?
  Reply
#4
just looks like the cotter pin is broken off - not uncommon. And a loose pin is also very bad - beats the BB axle round - been there, done that; not doing it again.

I'd use my angle grinder on it to get it apart so that I could put a modern BB and crankset on it.
Nigel
  Reply
#5
I ask because he said he tightened the "bolts".
  Reply
#6
yeah, now BOTH of the bolts have broken off inside the crank arms. How do i get these off? Do i have to drill them out or what? I'm going to the Denver free bike shop on monday.
  Reply
#7
(10-13-2013, 07:09 PM)liveanimal Wrote:  yeah, now BOTH of the bolts have broken off inside the crank arms.
There are supposed to be tapered pins with a nut on one side where you say the broken bolts are. Look here.
If he's broke, he might have to knock or drill out/Easy out the offending parts & see it there are some good flats left on the spindle.
  Reply
#8
I would bet the flats are shot......
Nigel
  Reply


Possibly Related Threads...

Forum Jump:

[-]
10 Latest Posts
Need to replace drum brakes but can’t id...
Today 01:04 AM
1983 Raleigh Super Course 12-speed
Yesterday 04:36 PM
Converting Townie 8D ebike to trail bike
Yesterday 01:20 AM
Gravel or fat bike for winter commute?
Yesterday 01:04 AM
State Bicycle Core Line | August 2020
08-10-2020 08:22 PM
Help me identify my new bike!
08-10-2020 03:47 PM
electric trikes- advice
08-10-2020 03:34 PM
Bike ride and wild camp
08-10-2020 02:45 PM
Waterford R-33 - Selling Advise
08-10-2020 01:42 PM
Hey everyone
08-10-2020 12:44 PM

[-]
Top 5 Posters This Month
no avatar 1. Jesper
52 posts
no avatar 2. Painkiller
16 posts
no avatar 3. Papa Dom
9 posts
no avatar 4. CharleyFarley
8 posts
no avatar 5. Sagan97
6 posts