Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.


Brake lever spring
#1
Hello,

I was trying to put in a new brake wire on a mountain bike Next Px 4.0 24".

Unfortunately I disassembled the brake lever (though it was not required to obviously).

Anyways now that I try to reassemble it, the brake lever spring mechanism is not working. The brake lever is of 'Sun run' brand (Chinese company).

Since I dont have a lot of time on my hand, I am thinking about getting a new brake lever. How do I know if it would fit on the bike's metal handle ?

I am looking to buy a cheap brake lever ? Any suggestions ?

Thanks y'all.
  Reply
#2
Measure the handlebar diameter. Most brake levers should work, sometimes you need shims, but they should come with the levers. For one of my bikes my LBS had a pair of used Avid break levers lying around that I could have for... dunno... a fiver or so. Just make sure that you get a lever for the style of brkaes you have, V-brakes (linear pull) and Cantilever breaks need different levers!
  Reply
#3
Thanks for your reply. It says that Px 4.0 has a V-brake installed.

I found this on amazon. http://amzn.com/B001GSMJF4

It doesnt mention for what type of brake system it is for (V or cantilever). Any ideas?
  Reply
#4
(09-24-2013, 11:03 AM)sab456 Wrote:  Thanks for your reply. It says that Px 4.0 has a V-brake installed.

I found this on amazon. http://amzn.com/B001GSMJF4

It doesnt mention for what type of brake system it is for (V or cantilever). Any ideas?
That one will not work; it is "short pull". V-brakes (and most mechanical disc brakes) need "long pull" aka linear.

This one will work:
http://www.amazon.com/Tektro-319A-BMX-Linear-Brake/dp/B000V6TYRI/
Nigel
  Reply
#5
(09-24-2013, 11:43 AM)nfmisso Wrote:  That one will not work; it is "short pull". V-brakes (and most mechanical disc brakes) need "long pull" aka linear.

This one will work:
http://www.amazon.com/Tektro-319A-BMX-Linear-Brake/dp/B000V6TYRI/

Hello

Thanks for your reply.

Can V-brakes be visually differentiated from Cantilever ? I am asking this as there is an old mountain bike lying around whose bike lever I could salvage and install on the Next PX 4.0.
  Reply
#6
Easily; take a look:

http://www.personal.psu.edu/bjd5054/blogs/flat_tyre/BRAKES.JPG
Nigel
  Reply
#7
(09-24-2013, 11:43 AM)nfmisso Wrote:  That one will not work; it is "short pull". V-brakes (and most mechanical disc brakes) need "long pull" aka linear.

This one will work:
http://www.amazon.com/Tektro-319A-BMX-Linear-Brake/dp/B000V6TYRI/

How would i know if this product would fit on a 24mm diameter bike metal bar ?
  Reply
#8
24mm OD is standard for most bars, except drop bars, it will fit. At worst, you'll need a shim.
Nigel
  Reply
#9
Thanks a lot to all of you guys for helping out. I was able to succesfully install a new brake lever on the bike. Brake system works great so far !
  Reply


Possibly Related Threads...
Thread
Author
Replies
Views
Last Post
 
20,476
12-23-2011, 09:42 AM
Last Post: Dale

Forum Jump:

[-]
10 Latest Posts
Bike navigation via your phone
Yesterday 07:38 PM
Where do you put your phone when riding?
Yesterday 07:33 PM
Greetings from W.N.Y.
Yesterday 05:21 PM
Would an Advanced Society Benefit from B...
Yesterday 12:10 PM
What must-know bike care tips are we ove...
Yesterday 11:06 AM
New in ROC
03-17-2025 09:20 PM
Barefoot Shoes--- ON or OFF?
03-17-2025 09:01 AM
A New Hope For Cheaper Bikes In 2025?! f...
03-17-2025 05:21 AM
Best suspension seat post?
03-17-2025 02:54 AM
Which cycling manager games are you play...
03-16-2025 06:42 PM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. Flowrider
14 posts
no avatar 2. enkei
13 posts
no avatar 3. rydabent
11 posts
no avatar 4. GirishH
10 posts
no avatar 5. Jake1
9 posts