Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.

Best Black Friday E-Bike Deals 2024 | Up to $1,700 in Savings

New: Take Part in the November Giveaway: Starts November 18th


Brake lever spring
#1
Hello,

I was trying to put in a new brake wire on a mountain bike Next Px 4.0 24".

Unfortunately I disassembled the brake lever (though it was not required to obviously).

Anyways now that I try to reassemble it, the brake lever spring mechanism is not working. The brake lever is of 'Sun run' brand (Chinese company).

Since I dont have a lot of time on my hand, I am thinking about getting a new brake lever. How do I know if it would fit on the bike's metal handle ?

I am looking to buy a cheap brake lever ? Any suggestions ?

Thanks y'all.
  Reply
#2
Measure the handlebar diameter. Most brake levers should work, sometimes you need shims, but they should come with the levers. For one of my bikes my LBS had a pair of used Avid break levers lying around that I could have for... dunno... a fiver or so. Just make sure that you get a lever for the style of brkaes you have, V-brakes (linear pull) and Cantilever breaks need different levers!
  Reply
#3
Thanks for your reply. It says that Px 4.0 has a V-brake installed.

I found this on amazon. http://amzn.com/B001GSMJF4

It doesnt mention for what type of brake system it is for (V or cantilever). Any ideas?
  Reply
#4
(09-24-2013, 11:03 AM)sab456 Wrote:  Thanks for your reply. It says that Px 4.0 has a V-brake installed.

I found this on amazon. http://amzn.com/B001GSMJF4

It doesnt mention for what type of brake system it is for (V or cantilever). Any ideas?
That one will not work; it is "short pull". V-brakes (and most mechanical disc brakes) need "long pull" aka linear.

This one will work:
http://www.amazon.com/Tektro-319A-BMX-Linear-Brake/dp/B000V6TYRI/
Nigel
  Reply
#5
(09-24-2013, 11:43 AM)nfmisso Wrote:  That one will not work; it is "short pull". V-brakes (and most mechanical disc brakes) need "long pull" aka linear.

This one will work:
http://www.amazon.com/Tektro-319A-BMX-Linear-Brake/dp/B000V6TYRI/

Hello

Thanks for your reply.

Can V-brakes be visually differentiated from Cantilever ? I am asking this as there is an old mountain bike lying around whose bike lever I could salvage and install on the Next PX 4.0.
  Reply
#6
Easily; take a look:

http://www.personal.psu.edu/bjd5054/blogs/flat_tyre/BRAKES.JPG
Nigel
  Reply
#7
(09-24-2013, 11:43 AM)nfmisso Wrote:  That one will not work; it is "short pull". V-brakes (and most mechanical disc brakes) need "long pull" aka linear.

This one will work:
http://www.amazon.com/Tektro-319A-BMX-Linear-Brake/dp/B000V6TYRI/

How would i know if this product would fit on a 24mm diameter bike metal bar ?
  Reply
#8
24mm OD is standard for most bars, except drop bars, it will fit. At worst, you'll need a shim.
Nigel
  Reply
#9
Thanks a lot to all of you guys for helping out. I was able to succesfully install a new brake lever on the bike. Brake system works great so far !
  Reply


Possibly Related Threads...
Thread
Author
Replies
Views
Last Post
 
20,011
12-23-2011, 09:42 AM
Last Post: Dale

Forum Jump:

[-]
10 Latest Posts
Tire Sizing (Or How to Buy A Tire)
Today 12:36 PM
Moving in Style: Beyond Regular Transpor...
Today 09:28 AM
The Roaming Radrunner Vlog 1 Why ride ...
Today 09:17 AM
Recording Bike Rides
Yesterday 01:37 AM
Ketone Ester $$$
11-19-2024 01:04 AM
Trek domane tyre
11-18-2024 01:58 PM
Old fossil buys Ebike
11-17-2024 06:39 AM
Bike bus
11-17-2024 12:14 AM
Second wheelset for ebike.
11-16-2024 08:20 PM
Humber "Eiffel Safety" bike 1800s
11-16-2024 03:05 PM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. Jesper
22 posts
no avatar 2. enkei
19 posts
no avatar 3. GirishH
14 posts
no avatar 4. Flowrider
11 posts
no avatar 5. ReapThaWhirlwind
11 posts