Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.

New: Take Part in the March Giveaway: Coming Soon 3/24


Where does this spool go?
#1
I am working on a High Plains Mountain bike. Appears to be in the 80's. I cant see where this one small spool goes. The two bigger ones are intact with the chin snaking through. Any help would be greatly appreciated. I wish I could just find a diagram. That would help tremendously. Here are some pictures. A chain guide would be awesome in pdf or something.
Thanks,
SchwinnMonkey
[Image: IMG_0039_zps63327a93.jpg]
[Image: IMG_0042_zps953c31c5.jpg]
  Reply
#2
that is not an 80's derailluer. if the spool as you call it goes with it it would be where the red one is. you must have a pile of parts and getting them mixed up. the rear freewheel is not and 80's cogset either
not even close. you might want to post more pics of the bike and other components to pin point the year closer. you are off by 20 yrs. at least. By the amount of paint chipped by the axle nut and lack of rust there and in the lug threads it is much much newer of a bike
There are two kinds of people in the world, "Those who help themselves to people, and those who help people!"
  Reply
#3
Yep the High plains is a 90's model...........Came aluminum and steel, mine is aluminum the second page shows the steel version. FYI

http://www.trfindley.com/flschwinn_1991_2000/1991_08.html
Never Give Up!!!
  Reply
#4
the chain is threaded through the derailleur incorrectly. And given the positioning of the derailleur - I suspect that it was taken apart, and not put back together correctly. The little black wheel does not got with that model of derailleur; which came with two large wheels.

I would purchase this: http://www.amazon.com/Shimano-Tourney-TX55-Speed-Derailleur/dp/B003ZM9RDQ/ and a new chain and start over.

Here is a diagram/picture: http://upload.wikimedia.org/wikipedia/commons/thumb/c/ca/Derailleur_Bicycle_Drivetrain.svg/300px-Derailleur_Bicycle_Drivetrain.svg.png

Also read ALL of this: http://www.parktool.com/blog/repair-help/chain-installation-derailleur-bikes

I use cable ties to hold the RD up while assembling the chain so that there is no tension on chain during assembly of the master link. I use SRAM or KMC chains and master links.
Nigel
  Reply
#5
I really thank everyone for helping me. I indeed had a pulley from another bike entirely. I did get the chain put back on however its not shifting right. Nfmisso is correct however resell for the bike is maybe 50 bucks. Its all good though.

Thanks again!
SchwinnMonkey

BYTW - You guys Rock!
  Reply
#6
(07-23-2013, 02:33 PM)SchwinnMonkey Wrote:  I really thank everyone for helping me. I indeed had a pulley from another bike entirely. I did get the chain put back on however its not shifting right. Nfmisso is correct however resell for the bike is maybe 50 bucks. Its all good though.

Thanks again!
SchwinnMonkey

BYTW - You guys Rock!

Around San Jose; a High Plains Mountain bike in good condition would go for over $100-
Nigel
  Reply


Forum Jump:

[-]
10 Latest Posts
Santini fluted frame
Today 01:39 PM
Expensive bikes with crappy wheels
Today 10:15 AM
Where are you from and What is your favo...
Yesterday 11:43 PM
2007 Trek Pilot S.P.A. 5.2
Yesterday 07:06 PM
2010 Specialized Hardrock
03-26-2024 09:16 PM
1990 Specialized Rockhopper How to Fluff...
03-25-2024 07:05 PM
Thread busted on right pedal crank
03-24-2024 08:52 PM
Trek domane tyre
03-24-2024 05:48 PM
Modern rims crack at spoke holes
03-24-2024 05:32 PM
Cup & Cone — Simple & Durable or PITA & ...
03-24-2024 04:53 PM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. Painkiller
21 posts
no avatar 2. Jesper
16 posts
no avatar 3. ReapThaWhirlwind
16 posts
no avatar 4. meamoantonio
15 posts
no avatar 5. GirishH
15 posts