Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.

New: Take Part in the March Giveaway: Coming Soon 3/24


Stuck stem on old bike
#1
Hi guys, this is my first post so I hope I'm putting it in the right place.
Also had a quick look around the site and couldn't find he answer so here it goes.
Picked myself up a little project, and old 70's/80's road bike (British I think)

I have been taking it apart with the idea of slowly fixing it up, I have completely stripped it down, almost ready to strip the paint, my last thing is the stem which seams to have somehow sealed itself to the forks.
There is a Allen bolt at the top which is very stiff and now become worn with my efforts to get it to loosen.

[attachment=4301]

Any tips or help would be very much appreciated. I don't know a huge amount as this is my first venture/experiment

Cheers guys and looking forward to learning a lot from these forums

Jo
  Reply
#2
Hi Jo;

You need to loosen (counterclockwise) the bolt a few turns, so that there is clearance underneath the head of the bolt, then put a block of wood on top of the bolt, and hit with a hammer until there is no clearance under the head of the bolt. Repeat until stem is loose.
Nigel
  Reply
#3
Hi Nigel

Thanks for the tip, I will keep trying but I currently can't loosen the bolt at all, the head of the bolt has worn away so an Allen key just slips through rather than getting a proper purchase on it.

Cheers

Jo
  Reply
#4
Hi Jo;

Okay, bolt is shot; what about the stem - are you trying to salvage it, or scrap it?

Salvage:
1. soak around outside edge with a penetrant; let sink in, reapply several times.
2. using a motor tool with a cutoff wheel, cut a slot in the bolt head to engage a big screw driver bit in a socket set.
3. follow procedure in my previous post.

Scrap:
1. use angle grinder to cut the stem through just below the handle bar mount.
2. check the remains of the bolt; if loose you should be able to pull off the remains of the stem. If tight, hammer it lightly with a center punch until loose.

If scrap, then I would use one of these:
http://www.amazon.com/Profile-Design-Threadless-Size-Converter/dp/B0028N14GQ/
which allows the use of the now standard 1 1/8" like this one:
http://www.amazon.com/Dimension-Threadless-Stem-Degree-Silver/dp/B005Z5EDE4/
which is available in lots of different lengths and angles.
Nigel
  Reply
#5
This is fantastic thank you!
Wasn't going to bother salvaging it so this is great and thank you so much for the recommendations I will look into them Smile

Is there anyway to give kudos etc on this site because you've been great!

Cheers

Jo
  Reply
#6
Thank you Smile
Nigel
  Reply


Possibly Related Threads...
Thread
Author
Replies
Views
Last Post
 
2,849
09-01-2019, 01:22 AM
Last Post: Joe_W
 
7,424
02-06-2016, 07:17 PM
Last Post: Lighttower
 
11,156
05-19-2015, 08:48 AM
Last Post: alexwang32
 
8,127
02-19-2014, 03:33 AM
Last Post: GeorgeET
 
9,553
06-01-2013, 06:58 PM
Last Post: Painkiller
 
48,887
10-21-2012, 07:19 AM
Last Post: FredS
 
9,251
10-26-2011, 11:43 AM
Last Post: chibler
 
25,375
09-26-2011, 12:00 PM
Last Post: trevgbb
 
29,578
06-03-2011, 08:19 PM
Last Post: mrdunk

Forum Jump:

[-]
10 Latest Posts
Santini fluted frame
Today 01:52 AM
2010 Specialized Hardrock
03-26-2024 09:16 PM
1990 Specialized Rockhopper How to Fluff...
03-25-2024 07:05 PM
Thread busted on right pedal crank
03-24-2024 08:52 PM
Trek domane tyre
03-24-2024 05:48 PM
Modern rims crack at spoke holes
03-24-2024 05:32 PM
Cup & Cone — Simple & Durable or PITA & ...
03-24-2024 04:53 PM
Falling back
03-24-2024 04:45 PM
Derailluer Hanger Alignment Tool
03-24-2024 02:51 PM
Chain sits on top of chainring when shif...
03-24-2024 02:41 PM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. Painkiller
20 posts
no avatar 2. ReapThaWhirlwind
16 posts
no avatar 3. meamoantonio
15 posts
no avatar 4. GirishH
15 posts
no avatar 5. Jesper
15 posts