Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.

New: Take part in the September Giveaway for Vvolt Sirius E-bike valued at $2999


Cable guide bottom bracket.
#1
My cable guide on bottom bracket is a press on type and doesn't have a screw.
Looked around the 'net for a replacement but all of them have a screw.
This is for an older Black Diamond, "Ascent" model mountain bike that I just got and need to get in shape.
thanks
  Reply
#2
Get a cable guide with a screw.

Then you have two choices:
1. drill and tap a hole in you BB housing - remove the bottom bracket first, and stuff something in there to contain the metal shavings. A wad of duct tape sticky side out works well.

2. Use 3M VHB tape to secure it on the outside. Clean the surfaces to be bonded with isopropyl alcohol (pharmacy), let try, then apply the tape. After you have in place, heat it up with a hair dryer to fully cure the adhesive.
Nigel
  Reply


Possibly Related Threads...

Forum Jump:

[-]
10 Latest Posts
What are your best biking places in your...
Today 10:00 PM
650B vs 650C which one is perfect for mo...
Today 09:54 PM
Schwinn Le Tour sagging chain
Today 09:06 PM
What was your first bicycle?
Today 08:21 AM
bike riding is a fun! isn't it ???
10-01-2022 02:16 PM
Campagnolo Freehub Lockrings
10-01-2022 05:13 AM
Biking and running apps
09-30-2022 08:27 PM
Newbie
09-30-2022 08:20 PM
Campy 10 speed cassettes
09-30-2022 09:53 AM
Where are you from and What is your favo...
09-29-2022 05:03 PM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. Jesper
21 posts
no avatar 2. ichitan
16 posts
no avatar 3. ReapThaWhirlwind
6 posts
no avatar 4. jasmin122
4 posts
no avatar 5. SPINMAN
3 posts