Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.

New: Take part in the August Giveaway for a brand new Street Bicycle Core Line fixed gear bike


Problems from Calcutta - Fork / tube removal
#1
Hi All

New to cycle overhaul and this forum. Apologies if my thread isn't in the right section!

I have a pretty basic MTB made by an Indian company - BSA / Hercules. The bikes been out of action for a while and I though I'd do a good overhaul and clean to get it back to being road worthy...

So the issue i'm facing is in dismantling the fork, where it looks like the headset is attached to a threaded fork (unsure how) that i cant seem to separate and remove.

Pics:

[Image: C360_2012-06-19-06-33-44.jpg]

[Image: C360_2012-06-19-06-38-32.jpg]

[Image: C360_2012-06-19-06-35-32.jpg]

[Image: C360_2012-06-19-06-37-13.jpg]

Any help would be greatly appreciated!

Thanks,

Kanak
  Reply
#2
looks to me like you have a steerer extension fitted, the black tube.
look down inside this and you should see an allen head bolt, loosen this, you may need to give the bolt head a sharp tap after, and remove tube.
  Reply
#3
(06-20-2012, 10:43 AM)trevgbb Wrote:  looks to me like you have a steerer extension fitted, the black tube.
look down inside this and you should see an allen head bolt, loosen this, you may need to give the bolt head a sharp tap after, and remove tube.

Thanks trev!

Did take a peek inside the rabbit hole but no bolt :-( Also, the extension clearly does not run down the length of the entire tube.

It could be that the extension is simply a tight fit - do i got at it with a hammer/put the extension in a vice and try prying it apart?
  Reply
#4
Hey all,

Heres a pic of the inside of the steerer extension:

[Image: C360_2012-06-21-00-40-25.jpg]

Going to go for it with brute force!

Wish me luck :-)
  Reply
#5
Hmmm, looks like a 1" quill to 1 and 1/8" A-head stem adapter, like this:

[Image: $(KGrHqV,!lkE2EPD5(NvBNk0)D8cu!~~_35.JPG]

Like Trev says, it usually has an allen bolt in the top.

Is it somehow fixed from the bottom, through the hole between the fork blades? I can't really make out what's going on that last picture.
  Reply
#6
(06-22-2012, 12:07 AM)xerxes Wrote:  Hmmm, looks like a 1" quill to 1 and 1/8" A-head stem adapter, like this:

[Image: $(KGrHqV,!lkE2EPD5(NvBNk0)D8cu!~~_35.JPG]

Like Trev says, it usually has an allen bolt in the top.

Is it somehow fixed from the bottom, through the hole between the fork blades? I can't really make out what's going on that last picture.


Thanks Guys.. it all worked out. The Hammer worked like a hammer should!

So here's what it looks like:

http://d2bm3ljpacyxu8.cloudfront.net/width/300/crop/0,0,300x180/toplineproducts.webs.com/C360_2012-06-22-10-24-55.jpg

@Xerxes: This piece, that you refer to as quill to head stem adapter (agree with the description) fits into the fork and is held in place by a metal barrier and rubber within fork. This prevents it from going any deeper than it needs to.

Not sure if this is standard on other fork systems or not.

Thanks again.. will be back soon enough Smile
  Reply
#7
I'm half guessing, because it's difficult to tell without looking at the whole thing in person, but I would suggest, that it is a quill stem adapter, like the one in the picture that I showed, but the top cap and the long bolt that reaches down the middle to the wedge at the bottom are missing. The wedge part is what is still in the fork steerer tube, probably stuck.

What do you think Trev?

If I'm right, you should be able to knock the wedge out of the tube from the bottom if you have something, possibly an old large screwdriver, or piece of steel tube that will reach it.

When you come to re-assemble it all, you will either need a long bolt and top cap, or a whole new quill - A-head adapter with all the parts.
  Reply


Possibly Related Threads...

Forum Jump:

[-]
10 Latest Posts
Need help with info about this Evans Cyc...
Today 03:20 PM
Back on the bike in Wales
Today 02:16 PM
State Bicycle Core Line | August 2020
Today 02:15 PM
BIKEDIRECT WAITING
Yesterday 05:05 PM
One side of V brake doesn't spring back
Yesterday 02:03 PM
From Henderson Nevada
Yesterday 01:26 PM
Replacing a front derailleur
Yesterday 10:55 AM
Putting the new bike together
Yesterday 10:18 AM
clicking new chain
08-03-2020 11:48 PM
Freewheel hub wiggling in place + Chain ...
08-03-2020 08:38 PM

[-]
Top 5 Posters This Month
no avatar 1. Jesper
66 posts
no avatar 2. CharleyFarley
16 posts
no avatar 3. Painkiller
15 posts
no avatar 4. Papa Dom
7 posts
no avatar 5. RoadRacer2020
7 posts