Crank arms seized

capner2112 · 12-13-2011, 10:03 PM

I'm need to overhaul my bottom bracket but the crankarms are stuck on the spindle. Any suggestions for safely removing them? I've tried reefing on them pretty good and they won't budge.

GeorgeET · 12-14-2011, 03:22 AM

Well no idea what kind of crank you got, but this may do the job. Most common.

http://www.parktool.com/product/crank-puller-for-square-taper-cranks-ccp-22

capner2112 · 12-14-2011, 08:22 AM

Looks to be what I need. Perhaps I'll make one in class (machining has major advantages).

GeorgeET · 12-14-2011, 04:07 PM

Ye not to many exact parts. The Only one is the inner crank arm thread and depth. The rest OK to approximate. You can do the ID for 3/8 SAE bolt and use a wrench on it.

These tools BTW sell for around $15. Do spray some penetrating oil on crank and inside arms the night before removing.

10 Latest Posts
Are you mainly into Mountain Biking, Roa... Yesterday 11:08 AM
Are 26" really dying out? Yesterday 11:02 AM
Wanted \| Magura Louse or Julie rear Yesterday 04:03 AM
Hatch Chiles Rule! 11-09-2026 04:56 PM
Should eBikers have to get an eBike lice... 11-09-2026 05:21 AM
How Bad Are E-bikes By You? 11-08-2026 10:29 PM
Shortness of breath. 11-08-2026 09:56 PM
Hello All 11-06-2026 09:03 AM
I don't usually wear a bike helmet. Does... 11-06-2026 02:48 AM
Chain skips under heavy load when pedall... 11-06-2026 02:44 AM

Join BikeRide on Strava

Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom