Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.

New: Take part in the January Giveaway for the DYU R1 20" City Electric Bike


Axle too long for rear drop outs
#1
Hi people

I would like to say thank you firstly for all the advice you have given me so far. Slowly but surely I am building my bike up.

The next challenge is as follows and I'm sure there is a simple solution but I'm not the most knowledgeable about bikes and would be really grateful for some advice.

I hope I am not repeating other users queries!


I have an aluminium frame and I'm about to fit a flip flop hub wheel. However it would seem that the axle is quite long/wide for the rear drop outs. I don't want to damage/bend the frame at the drop outs by over tightening the nuts . Is it possible to add spacers on the inside of the drop outs or even use two sets of nuts to tighten up or would it be better to fit a shorter axle?

I hope I am making sense.

Many thanks
let me clarify further. on the outer side of the drop outs (where the nuts tighten) there is the usual length of axle but more axle on the inner side.

Many thanks
  Reply
#2
It sounds like you have wide rear frame dropouts and the hub and the locking cone nuts on wheel are for a narrower frame.
It is not recommended to mess with aluminum frame spacing. Either to widen or to narrow.

If I understand correctly you have space on the inside of the frame and the hub. You probably have a 130mm frame and a 126 mm wheel. Yes you need to add spacers on both sides on the inside so when you tighten the axle nuts they do not compress the frame. OR get the right size wheel.

Photo would be great as words get confused.
Never Give Up!!!
  Reply
#3
1+ to George's comments; but to be sure a picture is required.

McMaster Carr has M10 x 1mm thick stainless steel washers that make great spacers
Nigel
  Reply


Possibly Related Threads...
Thread
Author
Replies
Views
Last Post
 
834
09-13-2021, 05:26 PM
Last Post: ReapThaWhirlwind
 
7,197
12-10-2016, 10:46 PM
Last Post: ccronin4
 
6,120
09-05-2015, 09:12 AM
Last Post: Sixtoejoe
 
9,837
07-26-2015, 03:36 PM
Last Post: nfmisso
 
14,869
09-24-2014, 03:25 PM
Last Post: !TREK4ME!
 
17,313
09-09-2014, 11:03 PM
Last Post: rayms
 
13,816
05-19-2014, 02:25 PM
Last Post: limey

Forum Jump:

[-]
10 Latest Posts
How much do you bike per year?
Today 12:45 AM
Counsel on a ‘73 Raleigh
Yesterday 12:09 AM
Failure to stop at stop sign means $500 ...
Yesterday 12:07 AM
paralyzed in a bike crash: Sports Illust...
Yesterday 12:04 AM
First Century
01-17-2022 11:41 PM
pedal crankset axle squeak
01-17-2022 11:23 PM
Finally Snow!
01-17-2022 08:40 PM
Aloha!
01-17-2022 05:19 AM
Question about Leg Shaving
01-17-2022 04:51 AM
Brand New Rusty Steel Split frame Bike
01-17-2022 04:36 AM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. Jesper
26 posts
no avatar 2. jeffg
17 posts
no avatar 3. ReapThaWhirlwind
15 posts
no avatar 4. Jake1
14 posts
no avatar 5. JR Namida
10 posts