Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.

New: Take Part in the February Giveaway for a Chance to Win 2x METRO Hybrid Bikes


21 INCH 12 speed rear problem
#1
Hi All, I'm new to the forum and need some help with rear "D". My son got a gift of a used 12 speed MTB. the bike as twist gear change. when we got the bike we had going from high to low changing gears on the rear. I cleaned and greased the "D" and oiled it. there was a cable housing that was fried on the top bar i did not change the cable housing because i don't have one readily available but i did the best job i could of cutting the fried housing an sticking it back in its place. He can now shift form first to sixth in a simple soft motion but as soon as he wants to go back to first the gear change gets stuck in 4th and can not go down even with my 200 pound adult hand. i do want to also note the adjusted on the shifter is chipped but id does not seam to affect the shift. I have disconnected the cable from the "D" and the shifter goes back and forth with ease. I have checked the low and high limit bolts and everything is fine. The tension when i move the "D" by hand seams as tight as the other bikes we have at home. I want to fix but have no idea where to start to look.

Any help would be greatly appreciated by an exited 9 year old cycler and his dad (me)
  Reply
#2
start with some pictures if you could
There are two kinds of people in the world, "Those who help themselves to people, and those who help people!"
  Reply
#3
and your location, maybe one of us is close enough to take a look.
Nigel
  Reply
#4
Look at the cable routing again. If both the dérailleur and the shifter can move freely (without the cable attached) it should be the cable, the housing or the routing. Can you move the cable easily? Is the routing inside the shifter correct?

Look at http://sheldonbrown.com/cables.html and check the cables. If the housing already was frayed you should probably replace it (and the cable). Housing is inexpensive, maybe 2EUR / m (1USD / ft ? too lazy to do that conversion), tops. Make sure you have the correct cable type (shifter and brake cables are different, as is the housing).
  Reply


Possibly Related Threads...

Forum Jump:

[-]
10 Latest Posts
1990 Specialized Rockhopper How to Fluff...
Yesterday 10:07 PM
Flat Repair Tools
Yesterday 03:49 PM
How to keep your bicycle safe?
Yesterday 03:31 AM
Top 3 Bibshorts in terms of value
Yesterday 03:07 AM
Why do spokes break?
02-25-2024 10:35 PM
New Wheel Question
02-25-2024 10:32 PM
Hello to all. I a just introducing mysel...
02-25-2024 10:29 PM
Chain sits on top of chainring when shif...
02-25-2024 10:16 PM
Dent on a new bicycle frame
02-22-2024 11:17 PM
My inexpensive strong 29 inch wheel
02-22-2024 11:01 PM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. GirishH
26 posts
no avatar 2. enkei
23 posts
no avatar 3. ReapThaWhirlwind
17 posts
no avatar 4. Painkiller
14 posts
no avatar 5. meamoantonio
14 posts