04-13-2011, 12:48 PM
It seems nobody takes apart freewheels. If it has free play side to side, I think, it is possible to readjust bearings.
There are shims inside to adjust bearings load. If races(cones) are worn out, you can just remove one or two shims. I found 5 shims in my freewheel, they have different thickness, so I'll choose which one to remove.
[attachment=2293]
There are shims inside to adjust bearings load. If races(cones) are worn out, you can just remove one or two shims. I found 5 shims in my freewheel, they have different thickness, so I'll choose which one to remove.
[attachment=2293]