Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.

New: Take Part in the new April's Giveaway for a Chance to Win the Euybike S4 Pro Max ebike worth $1299


Converting to single speed
#1
can anyone tell me how to turn this into a single speed? I have attached a photo.
  Reply
#2
They have kits online that you can buy that include spacers and one gear that you buy and slide on. Normally don't cost that much.
http://www.amazon.com/Origin8-Single-Speed-Conversion-Kit/dp/B002UZFU7G/
  Reply
#3
Wot he said.

The DMR one is a favourite of quite a few people I know.

You may have heard arguments for half-link singlespeed chains, but you don't really need one of these. A regular 8-speed chain will be fine (I find half-links aren't actually that strong anyway).
  Reply
#4
maybe this link will help:
http://www.instructables.com/id/Single-Speed-on-the-Cheap/
GO RIDE...
  Reply
#5
(12-17-2010, 04:31 AM)nameused Wrote:  They have kits online that you can buy that include spacers and one gear that you buy and slide on. Normally don't cost that much.
http://www.amazon.com/Origin8-Single-Speed-Conversion-Kit/dp/B002UZFU7G/

is this how it should look? For some reason the lockring is protruding a little. thanks for the help.
  Reply
#6
(12-17-2010, 06:27 PM)eorta7 Wrote:  
(12-17-2010, 04:31 AM)nameused Wrote:  They have kits online that you can buy that include spacers and one gear that you buy and slide on. Normally don't cost that much.
http://www.amazon.com/Origin8-Single-Speed-Conversion-Kit/dp/B002UZFU7G/

is this how it should look? For some reason the lockring is protruding a little. thanks for the help.

Most of the time when I see them the gear is in the middle of all the spacers. One key with single speeds is to make sure the chain line is as straight as possible. So set it up where the front gear that you are using and the rear gear are as close as possible to a straight line to each other.
  Reply
#7
yes ^^^ exactly.
Wheelies don't pop themselves. (from a QBP fortune cookie)
  Reply
#8
(12-17-2010, 09:06 PM)RobAR Wrote:  yes ^^^ exactly.

so I have it done properly? should the lockring be protruding a little like it is in the photo. what would i do differently to make it a fixed?
  Reply
#9
If the lockring snugged down well and nothing is loose, you should have it on right. Not quite sure what you mean by "protruding". The lockring should be snug up against what the outermost part is (spacer or cog).

To go fixed, you need a different wheel/hub. I've heard of people welding or gluing cassette hubs to make them fixed, but kind of a funky kludge. Also note that if you have vertical drop outs on the bike, it can be a little tricky to go fixed anyway because it is tough to get proper chain tension. You can't use a tensioner with fixed.
  Reply


Possibly Related Threads...

Forum Jump:

[-]
10 Latest Posts
Do you have a four foot rule?
Today 02:21 PM
Let me introduce myself
Today 07:56 AM
Paris-Roubaix
Yesterday 06:19 PM
What are the best cost effective ways to...
Yesterday 01:34 PM
Climbing hills: Where have you found the...
Yesterday 12:27 AM
Schrader vs Presta
04-17-2025 09:59 AM
New To The Forum
04-16-2025 11:50 PM
Good morning form Alberta CA
04-16-2025 08:16 AM
What is the best Mountain Bike you've ev...
04-15-2025 12:31 PM
Chainring Sizes
04-14-2025 09:28 PM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. GirishH
22 posts
no avatar 2. Flowrider
15 posts
no avatar 3. meamoantonio
13 posts
no avatar 4. SPINMAN
11 posts
no avatar 5. rydabent
9 posts