New: Take part in the February 2020 BikeRide Giveaway for a Proviz REFLECT360 Cycling Jacket

Welcome guest! Register or sign in to participate in the cycling discussions.


Reinserting Binder Pin
#1
I made which is now overly apparent mistake on removing the binder pin on my Ultegra PD 6700 pedal and having an impossible time putting the pin back in. I can thread the pin all the way through the binding but can't get the darn thing to set properly and can't get the threads to catch. I know the binding is under tension but just can't get it aligned. Any tricks anyone knows of?

thanks!
  Reply
#2
Going to make the guess you already looked this http://techdocs.shimano.com/media/techdocs/content/cycle/EV/bikecomponents/PD/EV-PD-6700-2939_v1_m56577569830696869.pdf . Not sure of the size binding pin but is there a hole in the other side? I was thinking of using a screwdriver (thin one) to go in the other side.
Good maintenance to your Bike, can make it like the wheels are, true and smooth!
  Reply
#3
(07-20-2010, 12:05 PM)Bill Wrote:  Going to make the guess you already looked this http://techdocs.shimano.com/media/techdocs/content/cycle/EV/bikecomponents/PD/EV-PD-6700-2939_v1_m56577569830696869.pdf . Not sure of the size binding pin but is there a hole in the other side? I was thinking of using a screwdriver (thin one) to go in the other side.

Yep, saw that. There is a hole on the other side. You can't see it as you line up the pin because the binding is in the way. There's not enough space, I don't think, to use a screwdriver but I'm going to tinker with that idea and see if leads somewhere. Thanks for the suggestion.
  Reply
#4
Yea sorry can not help anymore then that. Really never messed with those kind of pedals. Good luck.
Good maintenance to your Bike, can make it like the wheels are, true and smooth!
  Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Sram ten speed hollow pin chain ruko 2 8,137 07-13-2010, 10:10 PM
Last Post: Bill
  Drive pin hole slightly large tkltangent 4 5,991 12-30-2009, 11:02 PM
Last Post: DaveM

Forum Jump: