Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.


Campagnolo peanut butter wrench - substitute?
#1
I have an old bike that has a campagnolo crank on it with a 15 mm bolt holding it on.

After a fair amount of research and trying different sockets I have found the tool I need. It's called a peanut butter wrench. It's seems to be around 35$ on the internet.

Does anyone know of a substitute for this tool that's cheaper? Many Thanks!
  Reply
#2
(05-25-2010, 11:25 PM)shmule05 Wrote:  I have an old bike that has a campagnolo crank on it with a 15 mm bolt holding it on.

After a fair amount of research and trying different sockets I have found the tool I need. It's called a peanut butter wrench. It's seems to be around 35$ on the internet.

Does anyone know of a substitute for this tool that's cheaper? Many Thanks!

Could you share the link or a picture of your crank? This would help us bigtime.
Good maintenance to your Bike, can make it like the wheels are, true and smooth!
  Reply
#3
If the problem with normal sockets is that they don't fit into the hole because the walls are too think, you can buy things called "thin wall sockets". You should be able to get one for a lot less than $35.
  Reply
#4
Here's a picture of it. Thanks for the help. Apparently kyle tools sells them for 12.99. Probably going to get this one. Seems like a good investment. Thanks!!

(05-26-2010, 07:23 AM)Bill Wrote:  
(05-25-2010, 11:25 PM)shmule05 Wrote:  I have an old bike that has a campagnolo crank on it with a 15 mm bolt holding it on.

After a fair amount of research and trying different sockets I have found the tool I need. It's called a peanut butter wrench. It's seems to be around 35$ on the internet.

Does anyone know of a substitute for this tool that's cheaper? Many Thanks!

Could you share the link or a picture of your crank? This would help us bigtime.

[attachment=950]
  Reply
#5
I wanted to post several times, but the forum (only on this thread) kept eating my posts and then stating that I had posted them... weird.
Try a spark plug wrench or something like this http://t2.gstatic.com/images?q=tbn:lSBG3EPAdT7kAM:https://www.shoppingpoint24.com/images/produkte/513169.jpg
  Reply
#6
Hmm you know Park Tools makes (made?) a wrench similar to that. Only problem is that I think it is only one wrench a 14mm, 15mm, and 16mm extruding ends with a screw driver end on it (for the crank but removal). I have one but do not know the number of it. Later today I will post a picture of it.
Good maintenance to your Bike, can make it like the wheels are, true and smooth!
  Reply


Possibly Related Threads...

Forum Jump:

[-]
10 Latest Posts
Do you have a four foot rule?
Today 09:41 AM
Energy gels for cycling
Today 09:33 AM
Injury Recovery
Today 09:28 AM
A New Hope For Cheaper Bikes In 2025?! f...
Today 09:21 AM
Bike navigation via your phone
Today 09:19 AM
Purchasing First Bike Advice
Today 09:16 AM
Greetings from W.N.Y.
Today 09:07 AM
New in ROC
Today 09:05 AM
Giant reporting profits are 60% down
Today 09:03 AM
Where do you put your phone when riding?
Yesterday 07:33 PM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. Flowrider
14 posts
no avatar 2. enkei
13 posts
no avatar 3. meamoantonio
13 posts
no avatar 4. GirishH
10 posts
no avatar 5. rydabent
9 posts