Chain Rubbing Front Derailleur

[Surly LHT]

What I have always done put my chain on the big ring on front and the small cassette on rear then pull the cable slack out. You may need to back off on the cable adjustment a little or put a little pull on it just make it clear the chain when you are on the big ring on FD and it should work fine for the smaller chain ring on the FD when you are on the smaller chain ring you should be able to go threw all the gears on back RD with out it touching your FD. If not you still need to do a little more adjusting. To your cable of the adjustment screws. Hope this helps you out a little.