07-16-2013, 12:52 PM
Hi Jo;
You need to loosen (counterclockwise) the bolt a few turns, so that there is clearance underneath the head of the bolt, then put a block of wood on top of the bolt, and hit with a hammer until there is no clearance under the head of the bolt. Repeat until stem is loose.
You need to loosen (counterclockwise) the bolt a few turns, so that there is clearance underneath the head of the bolt, then put a block of wood on top of the bolt, and hit with a hammer until there is no clearance under the head of the bolt. Repeat until stem is loose.
Nigel
![[-]](https://forums.bikeride.com/images/flatty/collapse.png "[-]")
