Adjusting 105 FD problems

[larsonian]

(01-13-2013, 04:50 PM)painkiller Wrote:  first off it seems you have started to mutilate the front cable a bit. I leave the cable uncut until I have it dialed in so I have more to work with. your low limit screw should be set before the cable is ever attached so if you are fiddling with the L limit after the cable is attached that would mess things up from the start. your H screw should also be set before the cable is attached but can be dialed in a bit after the cable is attached.
I would like to a picture directly from the side to see your gap from front derailluer to the chainring. and go from there

Here's the side view, thanks for the response