Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.


Stuck saddle post
#1
Hi i have a problem with my saddle post, as it is stuck wont come up wont go down, any idears how to free it.

  Reply
#2
This is one of the worst things that can get stuck, it is even "more fun" than a thread on freewheel that won't come off. My suggestion would be to follow:<br />
http://www.sheldonbrown.com/stuck-seatposts.html
good luck, you need it.

  Reply
#3
This is truly the most powerful product I have ever found for metals that seize to each other:
http://www.pbblaster.com/PB_Blaster.html
  Reply
#4
Most of the time my response is, "So, you needed a new frame anyway right?"

Just kidding. It is possibly the hardest thing to get unstuck.

I usually skip steps 1 and 2, involving trying to turn with the saddle attached (Which can bend the rails), using a pipe wrench with rubber padding (Which can deform the post), and go straight to 3.

I wrap the post in a cold compress, for about 25 minutes, or as long as the compress will stay cold, and then get the CO2 cartridge and blast it. The entire cartridge. And usually that's enough to shrink the metal to the point you can take it out.

I usually go to a kitchen supply store or a paintball shop to get the cartridges. But since this is likely the only time you'll be doing this, just buy a couple from the LBS.
Dedicated scholar of bicycles
  Reply
#5
You have a picture of your bike you can put here in the forum? Or list the make model?
Good maintenance to your Bike, can make it like the wheels are, true and smooth!
  Reply
#6
I have to search the archives of the frame builder mailing list, there was a discussion some days ago, I think I remember that the solution was (for steel "welded" to aluminum) applying ammonia to it. It will dissolve the aluminum but not touch the steel.
  Reply
#7
The ammonia trick works, but only if there is sufficient space between the seat post and the frame. if its REALLY corroded and stuck in there, there may not be room for the ammonia to do its thing.

That, and the ammonia you buy at the hardware store is an aqueous solution, since ammonia boils at -28 Fahrenheit, and the oxidation of the aluminum releases hydrogen, and if the OP smokes, this might not be a great idea in the basement.

From what I understand, quite a lot of hydrogen is given off, and it's not like you can smell it, its colorless and odorless, so you would be looking at a situation where a well ventilated area is required.

My two cents? Sacrifice the seat post and squish it in a bench vise, then turn the frame ever so slowly back and forth to release it. Seat posts are cheaper than frames. Well, some are.Big Grin
Dedicated scholar of bicycles
  Reply
#8
With everything said above I am wandering what kind of Bike it is because of the type of frame. If it is a lower end MTB frame then there is bottom access which would help immensely. Could do a combination of the ammonia or pbblaster (depending on the metal make-up), hair dryer and CO2, then quickly yank like hell method! That don't work vise time!
Good maintenance to your Bike, can make it like the wheels are, true and smooth!
  Reply
#9
I've never heard of the ammonia method before. Good to know!
  Reply


Possibly Related Threads...
Thread
Author
Replies
Views
Last Post
 
36,511
04-14-2021, 01:28 AM
Last Post: Jesper
 
5,094
07-22-2020, 07:08 PM
Last Post: Jesper
 
3,726
03-08-2020, 02:34 PM
Last Post: G_M
 
7,484
06-04-2017, 04:16 PM
Last Post: Eugbug
 
8,919
02-06-2016, 07:17 PM
Last Post: Lighttower
 
13,141
05-19-2015, 08:48 AM
Last Post: alexwang32
 
12,615
10-24-2014, 04:07 PM
Last Post: cny-man
 
10,174
02-19-2014, 03:33 AM
Last Post: GeorgeET

Forum Jump:

[-]
10 Latest Posts
Raleigh Sports Serial Number
Yesterday 11:10 AM
Safest bike helmets
Yesterday 10:16 AM
The great thing about trikes
Yesterday 10:12 AM
Tour de FRANCE 2025
Yesterday 09:10 AM
Full Moon Ride - Sunshine Coast
07-08-2025 10:46 PM
Continued learnings from bikepacking
07-08-2025 10:40 PM
What are the pros and cons of using a 26...
07-08-2025 10:35 PM
Cutting Drag Watts
07-08-2025 03:54 PM
How often check or change mechanical dis...
07-08-2025 03:24 PM
Looking for an electric bike for someone...
07-08-2025 03:12 PM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. GirishH
22 posts
no avatar 2. Flowrider
22 posts
no avatar 3. meamoantonio
17 posts
no avatar 4. enkei
15 posts
no avatar 5. Jesper
14 posts