HI. I have recently acquired a 12 speed Bridgestone RS 1500 bicycle in excellent condition except for the tires that I will be replacing. My problem is other than its old (80's best guess) I cant find anything online about it. Not even on the Bridgestone web pages. Any info would be appreciated.
Bikes like this are made for promotional means.
They're not series types of bikes. They're just a one-of run intended to advertise the brand.
Whoever made it, likely has a series type frame that was used to produce this for Bridgestone.
Whatever you really need to know about the bike can be surveyed with the bike in hand.
What exactly were you curious about?
I meant to say typically. I looked into this and see that Bridgestone has an entire venture into the bike industry.
It appears they are still making bikes aimed at the higher end market.
Yours though, is obviously dated, and relates to the high profit era based on steel frames (marketed to appeal on durability).
Location: Northern Florida, USA
Bikes from the 80s (and 70s) were much more appropriately priced. Is was not about "high profits" made from selling a few higher priced bikes, but instead high volume sales. New bikes now are vastly overpriced for what you get compared to bikes from 35-40 years ago when fit with comparable components for the time. If you had bought any quality bike (like Bridgestone) brand new in the 80s you would know; I have purchased new bikes in the 80s; great handmade bikes for the cost ($200-$300) and no replacement of components required since they were made to last. This is why you can find many early bikes with original components on them still working flawlessly; I ride 50 year old bikes without replacing anything other than chains or sometimes aluminum cogs. Yes, steel is durable; exactly why professionals used it until technology allowed for carbon to become choice, but primarily due to weight and certainly not durability. No carbon fiber frame would handle any crash I've been in and have been usable for anything but a boat anchor (no good for that either!). Only one bent fork on a steel frame which was fixed and safely used for thousands of miles without issue.
Location: Northern Florida, USA
Please understand that this is a "Zombie" thread where the "OP" is no longer following.
If folks want to expand on Bridgestone Bikes as a dedicated thread than I will be happy to provide all of my knowledge and experience of these bikes and not just more generalities that do nothing to inform/progress the conversation started by the "OP".
We can use "Sheldon Brown's/Harris Cyclery's" as a reference point to many brands of bikes, components, and methods of repair and maintenance. It is an excellent reference source up to a certain point. So let's just put that out there for any and everyone unless you are talking about a very specifically identified model of a bike or component; some of which may be addressed on the "S. Brown" site and some/many of which may not be addressed. I generally assume that most folks asking questions here are not going to take much time looking online at specific sites since if they had they, in most cases, not bother to submit an inquiry to the community on this site after being able to locate the info elsewhere..
Please look at the thread date (03/31/2022) and see if your comment relates DIRECTLY TO (12 speed Bridgestone RS 1500 bicycle) a specific model/type/or brand question, or only to a very general generic portion of question. Specifics need to be submitted only if directly related to the "OP's" thread; or submitted separately as a new thread dealing more generally with a bike brand, model, or component. There are always generalities, be they questions or comments; but even then they should be targeted to what the "OP" is trying to get addressed. Just look at this thread and see what I am talking about: the first response did nothing to address the "OP's" query and unfortunately was wrong regarding the limited information that was provided (almost as if the respondent knew nothing about what the "OP" was asking about). There is a vast amount of cycling knowledge that I do not possess, but I will not just respond with a comment that does nothing to help the "OP" answer their question, or only provides an "uneducated/inexperienced" answer based on my opinion without acknowledging that it is an opinion and/or knowledge based on hearsay, or is anecdotal.
As a note; most bike companies (smaller and larger, even some artisan builders) made low to higher end racing bikes, touring bikes, commuter bikes, children's bikes, and/or misc. specialty bikes; and then added mtb's and more (hybrids, gravel, etc.) later into the 80s/90s and beyond. This is nothing new and has been going on for 100 years. I speak on this as someone who owns and works on bicycles (production and custom; mostly road, but some early off-road) from the 1920's and newer; and I still feel like an idiot. I would be happy to start an in-depth thread regarding the history, technological development, and marketing of bikes if that would take care of all of the general comments that quite often are common sense and/or readily found online and in cycling publications (most of which can be accessed online) through the years; and/or directly from manufacturer/shop sources, etc.