WTB 2011 BMC Road Racer Seatpost

[Euskadi]

WTB Seatpost for 2011 BMC Road Racer SL01. Post specs: Streampost 73.5, that is 350 mm long using BMV wedge angle/lock design. Mine cracked at the bolt hole connecting to the saddle. Looking for one shown on photos. Note: BMC no longer sells these new. Been looking at common sites such as ebay.



   

   

[Euskadi]

Was able to source a Streampost with a frame I didn't need at this time, but will keep to build it up. The post was pricy indeed. These older BMC parts are very rare. I'm sure if you're a BMC older cycle owner, you know that already. Be warned if not aware.

[Zihan Chen]

(11-12-2021, 06:49 PM)Euskadi Wrote:  WTB Seatpost for 2011 BMC Road Racer SL01. Post specs: Streampost 73.5, that is 350 mm long using BMV wedge angle/lock design. Mine cracked at the bolt hole connecting to the saddle. Looking for one shown on photos. Note: BMC no longer sells these new. Been looking at common sites such as ebay.

Hello Euskadi, I also have a problem with the streampost. I have a sl01 and the long bolt connecting to the lower metal locking mechanism is snapped. Just wondering if you have working seatpost(parts) available? Been searching all over the internet and found nothing.