Thru Axle 150mm x 15mm needed

[bald_iver]

   

asked this question over on /r/fatbike and i'll ask here as well:

i bought a used fat bike, a mongoose argus comp, that was upgraded with a rockshox bluto 100mm suspension fork. I have a full squish XC bike, and with no real need for the supsension on the fatbike, i purchased the stock mongoose alloy rigid fork ($50). I am planning on swapping it with the bluto, then selling the bluto to pay for some cold weather gear for the upcoming wisco winter as the whole justification for buying a fatbike in the first place was to be able to ride in the winter and get off the fucking trainer

now my question is: Mongoose is shipping me the fork without a thru-axle. The only specifications on the mongoose website for the fork are: 150mm x 15mm thru axle. How do I go about finding a thru axle to fit this fork? Mongoose support has been less than helpful, not being able to provide me more detailed specifications (thread pitch, spacing, etc). Any advice/suggestions?

cheers

[Painkiller]

does the wheel you have now have a 15mm thru axle ?

[bald_iver]

(08-28-2019, 07:52 PM)Painkiller Wrote:  does the wheel you have now have a 15mm thru axle ?

yes, the bluto has the following thru axle:

MAXLE
[00.4318.005.003] AXLE MAXLE LITE FRONT MTB, 15X150, LENGTH 198MM, THREAD LENGTH 9MM, THREAD PITCH M15X1.50

[Painkiller]

should be an easy sort for your lbs. take your new fork, wheel and old axle with you.