Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.

New: Take Part in the October Giveaway to Win the Qiolor TIGER Retro Electric Bike


Brake lever spring
#1
Hello,

I was trying to put in a new brake wire on a mountain bike Next Px 4.0 24".

Unfortunately I disassembled the brake lever (though it was not required to obviously).

Anyways now that I try to reassemble it, the brake lever spring mechanism is not working. The brake lever is of 'Sun run' brand (Chinese company).

Since I dont have a lot of time on my hand, I am thinking about getting a new brake lever. How do I know if it would fit on the bike's metal handle ?

I am looking to buy a cheap brake lever ? Any suggestions ?

Thanks y'all.
  Reply
#2
Measure the handlebar diameter. Most brake levers should work, sometimes you need shims, but they should come with the levers. For one of my bikes my LBS had a pair of used Avid break levers lying around that I could have for... dunno... a fiver or so. Just make sure that you get a lever for the style of brkaes you have, V-brakes (linear pull) and Cantilever breaks need different levers!
  Reply
#3
Thanks for your reply. It says that Px 4.0 has a V-brake installed.

I found this on amazon. http://amzn.com/B001GSMJF4

It doesnt mention for what type of brake system it is for (V or cantilever). Any ideas?
  Reply
#4
(09-24-2013, 11:03 AM)sab456 Wrote:  Thanks for your reply. It says that Px 4.0 has a V-brake installed.

I found this on amazon. http://amzn.com/B001GSMJF4

It doesnt mention for what type of brake system it is for (V or cantilever). Any ideas?
That one will not work; it is "short pull". V-brakes (and most mechanical disc brakes) need "long pull" aka linear.

This one will work:
http://www.amazon.com/Tektro-319A-BMX-Linear-Brake/dp/B000V6TYRI/
Nigel
  Reply
#5
(09-24-2013, 11:43 AM)nfmisso Wrote:  That one will not work; it is "short pull". V-brakes (and most mechanical disc brakes) need "long pull" aka linear.

This one will work:
http://www.amazon.com/Tektro-319A-BMX-Linear-Brake/dp/B000V6TYRI/

Hello

Thanks for your reply.

Can V-brakes be visually differentiated from Cantilever ? I am asking this as there is an old mountain bike lying around whose bike lever I could salvage and install on the Next PX 4.0.
  Reply
#6
Easily; take a look:

http://www.personal.psu.edu/bjd5054/blogs/flat_tyre/BRAKES.JPG
Nigel
  Reply
#7
(09-24-2013, 11:43 AM)nfmisso Wrote:  That one will not work; it is "short pull". V-brakes (and most mechanical disc brakes) need "long pull" aka linear.

This one will work:
http://www.amazon.com/Tektro-319A-BMX-Linear-Brake/dp/B000V6TYRI/

How would i know if this product would fit on a 24mm diameter bike metal bar ?
  Reply
#8
24mm OD is standard for most bars, except drop bars, it will fit. At worst, you'll need a shim.
Nigel
  Reply
#9
Thanks a lot to all of you guys for helping out. I was able to succesfully install a new brake lever on the bike. Brake system works great so far !
  Reply


Possibly Related Threads...
Thread
Author
Replies
Views
Last Post
 
19,956
12-23-2011, 09:42 AM
Last Post: Dale

Forum Jump:

[-]
10 Latest Posts
Schwinn meridian rear drive axle
Today 04:36 PM
Schwinn trike NOISE
Today 04:31 PM
What was your first bicycle?
Yesterday 04:11 PM
Great UK Cycle Camping Map, For E-Bikes,...
Yesterday 05:38 AM
Charging at campground
Yesterday 05:33 AM
Failure to stop at stop sign means $500 ...
Yesterday 05:27 AM
Bicycle enthusiast located in California
Yesterday 04:15 AM
Moving in Style: Beyond Regular Transpor...
Yesterday 01:29 AM
Do you plan or random ride your MTB ride...
11-02-2024 11:43 AM
Cycling is Anti-Aging, But There's a Cat...
11-02-2024 11:36 AM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. enkei
18 posts
no avatar 2. Jesper
17 posts
no avatar 3. GirishH
13 posts
no avatar 4. Flowrider
12 posts
no avatar 5. Talha
10 posts