Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.


Suitable Sachs Huret front derailleur replacement
#1
Hi

I Got given an old Peugeot Premiere racing bike by my next door neighbour at the end of last year, I think it is around '84 vintage, it has a pearlescent white frame with blue stickers, it's quite a retro bike and they seem to go for reasonable money on ebay.

The front derailleur is a Sachs Huret and the internal face that pushes the chain away from the down tube has worn through the plating and is rusting badly.

I was thinking of trying to find something new old stock to bung on it, something Shimano would be good, there are lots on ebay with prices starting from £1 so hopefully a cheap bargain can be had.

What I would like to ask is are front derailleurs much the same regards the tube size they fit, also does it have to be a 2 Cog one, I assume you just tune out the adjustment with the 2 little screws?

Cheers
Cannondale, handmade in USA............................................Refined in Surrey, England.
- Cannondale F500, Kona Blast, Kona Caldera-
  Reply
#2
tube clamp size is the most important, next but not always an issue is seat tube angle compatibility
sometimes you can get away using a triple derailluer for road but not a road for a triple
so I recommend finding the one you can afford and go with the road/double
and you should be fine
There are two kinds of people in the world, "Those who help themselves to people, and those who help people!"
  Reply
#3
Pete; it sounds like you are planning on keeping it period correct, and looking for a mid '80s FD - I would suggest a Suntour or Campy over a Shimano.

Another choice, if you are other wise happy with the Huret, it to disassemble it, and get the cage hard electro-less nickel plated, 25 to 35 microns thick. With a quality plating job, you will not have to worry about the nickel wearing through.
Nigel
  Reply
#4
Cheers Guys.

Your right Nigel, I'd like to keep it as original as I possibly can regarding the looks of the bike, I don't mind upgrading but would like something in keeping with the bike.

I might try and source a similar Sachs Huret FD, I did see a new old stock one on ebay that was still in the original box but it got snapped up pretty quick.
Cannondale, handmade in USA............................................Refined in Surrey, England.
- Cannondale F500, Kona Blast, Kona Caldera-
  Reply


Possibly Related Threads...
Thread
Author
Replies
Views
Last Post

Forum Jump:

[-]
10 Latest Posts
Post-Ride Nutrition
Today 02:06 AM
🚴‍♂️ Saddle Up for the Belgian Waffle Ri...
Today 02:03 AM
Pre Ride Food Intake
Today 12:14 AM
SAVA Explorer 6061?
Yesterday 03:31 PM
braking by reversing the pedals
Yesterday 01:00 PM
Zwift v Spin v Wahoo
04-01-2025 05:59 PM
Have you Ever Tried an Electric Bike?
04-01-2025 05:07 PM
Good Morning from SW Ohio
04-01-2025 07:32 AM
(So California) PV Dr to be closed to bi...
03-31-2025 09:14 PM
Tubeless vs. tubes: What are the pros an...
03-31-2025 08:28 AM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. GirishH
22 posts
no avatar 2. Flowrider
19 posts
no avatar 3. meamoantonio
12 posts
no avatar 4. Jake1
11 posts
no avatar 5. SPINMAN
8 posts