Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.

Best Black Friday E-Bike Deals 2024 | Up to $1,700 in Savings

New: Take Part in the November Giveaway: Starts November 18th


How Does This Freewheel Come OFF?
#1
So this may be an ignorant simpleton type question, but how do I get this off? The two small depressions can't be it, that's gotta be access to the innards. Is it two chainwhips, one on a rear cog and another on a front one and turn the front one counter clockwise? Is it voodoo, chicken bones, lizard tail and a crows foot?
7 speed freewheel, Suntour Japan. It's on an old Bianchi Eros (Japan). Everything seems to be Suntour Radius stuff, the shifters are on the downtube, front is micro-ratcheting friction type, rear is indexed, marked Radius Accushift Plus.
7 speed, 13 tooth to 23 tooth.

[Image: DSC00734.jpg]

A little closer:

[Image: DSC00736.jpg]
  Reply
#2
I think it's got to be a cassette. Two chain whips, remove by unscrewing the smallest cog. But it does look a bit different than the 6 spd suntour cassettes I've seen.
  Reply
#3
Haven't a clue; but some of these may lead to an answer:
http://www.sheldonbrown.com/suntour.html
http://www.yellowjersey.org/stfw.html
Nigel
  Reply
#4
(07-08-2011, 03:39 PM)nfmisso Wrote:  Haven't a clue; but some of these may lead to an answer:
http://www.sheldonbrown.com/suntour.html
http://www.yellowjersey.org/stfw.html

If you don't have a clue, I'm in trouble.
  Reply
#5
is it possible that this is a faulty component and should have had a spline machined into it, but had missed that op at the production stage?

You can remove it by dismantling it and slogging it off with a hammer and chisel, but this will probably damage it beyond use.
  Reply
#6
I called Park Tool Technical Assistance & the guy seemed confident that it is removed with two chainring tools. Loosen & remove the front cogs & the rear cogs come off together in the manner of a psuedo cassette.
  Reply
#7
The hub's left side is normal with 1/4" bearings in a standard cone & cup. The drive side uses a reversed set up, with the cup on the axle & the cone on the hub and twelve 3/16" bearings!
The drive side looks like this (with the skewer removed for clarity)
[Image: Hub1a.jpg]
[Image: Hub1.jpg]
Then with the normal cup & cone removed on the left side the axle is pulled out & the hub with the cone on it revealed
[Image: DSC00734.jpg]
The axle with the drive side cup (please excuse the fine dust)
[Image: Cup1.jpg]
[Image: Cup2.jpg]

The funky cup with the twelve 3/16" balls
[Image: Cup3.jpg]
[Image: Cup7.jpg]
Just for scale here's 3/16" and 1/4" balls
[Image: DSC00867.jpg]
Use 2 chainwhips (this is shown tightening)
[Image: Hub5.jpg]
When the front cog is loosened
[Image: Hub6.jpg]
Removed for clarity
[Image: Hub7.jpg]
Which leaves the "freehub"
[Image: Hub4.jpg]
[Image: Hub4a.jpg]
And the pseudo cassette
[Image: Hub8.jpg]
With the locking cog reversed
[Image: Hub9.jpg]

Wierd, huh?
  Reply
#8
Suntour cassette !!

Since my last post, I have been learning about them also, as our tandem has one too.
Nigel
  Reply


Forum Jump:

[-]
10 Latest Posts
Cycling is Anti-Aging, But There's a Cat...
Today 06:15 PM
What was your first bicycle?
Today 08:06 AM
need e-trike advice (wife knee surgery)
Yesterday 07:59 PM
Moving in Style: Beyond Regular Transpor...
11-22-2024 07:43 AM
Second wheelset for ebike.
11-22-2024 01:41 AM
Tire Sizing (Or How to Buy A Tire)
11-21-2024 12:36 PM
The Roaming Radrunner Vlog 1 Why ride ...
11-21-2024 09:17 AM
Recording Bike Rides
11-20-2024 01:37 AM
Ketone Ester $$$
11-19-2024 01:04 AM
Trek domane tyre
11-18-2024 01:58 PM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. Jesper
20 posts
no avatar 2. GirishH
14 posts
no avatar 3. ReapThaWhirlwind
11 posts
no avatar 4. Flowrider
10 posts
no avatar 5. Talha
10 posts