Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.


Help With V-Brakes please!!!
#1
I am looking to purchase Shimano V-brakes, i currently have crappy stock canti-lever brakes on my MTB.

I have 2 questions:

1) Is Shimano a good brand? Any other brands/models anyone would recommend? (preferably in-expensive)

2) Do I need to purchase new brake levers, or can i use my old one's? If i need new one's any good brands anyone recommends? (Preferably in-expensive)
  Reply
#2
I like AVID and Tektro:
http://www.amazon.com/Tektro-839AL-LPull-Brak-Black/dp/B001CJZ0IU/
http://www.amazon.com/Avid-Single-Digit-Brake-Forged/dp/B002AGA12Y/

and Tektro Eclipse Levers
http://www.amazon.com/Tektro-Eclipse-Universal-Brake-Silver/dp/B000GDAUH4/

Yes, you need new levers.
Nigel
  Reply
#3
(05-08-2011, 01:45 PM)nfmisso Wrote:  I like AVID and Tektro:
http://www.amazon.com/Tektro-839AL-LPull-Brak-Black/dp/B001CJZ0IU/
http://www.amazon.com/Avid-Single-Digit-Brake-Forged/dp/B002AGA12Y/

and Tektro Eclipse Levers
http://www.amazon.com/Tektro-Eclipse-Universal-Brake-Silver/dp/B000GDAUH4/

Yes, you need new levers.

Can i use the same cables or do i need those too?
  Reply
#4
i would definately go for tektro myself having used them for many years without fault.
you more than likely will need to change the cables but they are inexpensive so i wouldnt worry too much about the cost
ride until your wheels fall off
  Reply
#5
New cables will add less than $5- to your cost....

I use Bell brand from Wal-mart, multipack. Make sure you remove the cable from the housing, and lubricate it along its whole length. You can use oil or grease for lubricating. Do not use WD40 or similar as it will gum up.
New cables will add less than $5- to your cost....

I use Bell brand from Wal-mart, multipack. Make sure you remove the cable from the housing, and lubricate it along its whole length. You can use oil or grease for lubricating. Do not use WD40 or similar as it will gum up.
Nigel
  Reply
#6
Hey Nigel, dealba said he had "canti-lever" currently on the bike. Aren't the bosses different sized?
Good maintenance to your Bike, can make it like the wheels are, true and smooth!
  Reply
#7
Hi Bill;

They are the same size, have spring holes in the right place relative to the boss, and in the correct position. Makes swapping easy Smile.

If the cantis on the tandem to prove to be as good as V-brakes; it will get a set of Avid SD5 linear pulls too.
Nigel
  Reply
#8
Thats why I put the question mark Wink . Seems odd that I thought that. Somewhere there was a debate on the sizes. Very good information to know. +1 to my learned something new today lol.

Thanks.
Good maintenance to your Bike, can make it like the wheels are, true and smooth!
  Reply
#9
(05-09-2011, 10:59 AM)nfmisso Wrote:  Hi Bill;

They are the same size, have spring holes in the right place relative to the boss, and in the correct position. Makes swapping easy Smile.

If the cantis on the tandem to prove to be as good as V-brakes; it will get a set of Avid SD5 linear pulls too.


hi im totally NEWB in case you couldn't tell already XP

so what are bosses and i do not understand what your suggesting in the highlighted text.

thanks for all the help everybody!
  Reply
#10
(05-10-2011, 06:26 PM)dealba Wrote:  
(05-09-2011, 10:59 AM)nfmisso Wrote:  Hi Bill;

They are the same size, have spring holes in the right place relative to the boss, and in the correct position. Makes swapping easy Smile.

If the cantis on the tandem to prove to be as good as V-brakes; it will get a set of Avid SD5 linear pulls too.


hi im totally NEWB in case you couldn't tell already XP

so what are bosses and i do not understand what your suggesting in the highlighted text.

thanks for all the help everybody!

Bosses are the posts that the swing arms of the brakes slide on to.
Good maintenance to your Bike, can make it like the wheels are, true and smooth!
  Reply
#11
I cannot see the text color chosen for the highlight; but am guessing cantilever vs linear pull (aka V-brake) brakes.

Cantilever: http://media.rei.com/media/ll/49f607cb-71a9-44f2-9555-97146623967d.jpg

Linear Pull (aka V): http://orangecycleorlando.com/images/library/site/pict_linearplbrk_f.gif

Linear pull (V-brakes) are in expensive, reliable, easy to adjust and incredibly powerful.

If the cantis on the tandem do not prove to be as good as linear pull brakes; I will be replacing the cantis with these:
http://www.amazon.com/Avid-Single-Digit-Brake-Forged/dp/B002AGA12Y/
Nigel
  Reply


Forum Jump:

[-]
10 Latest Posts
Giant reporting profits are 60% down
Today 12:21 AM
Thoughts on tariff effects on the cyclin...
Yesterday 11:06 AM
braking by reversing the pedals
Yesterday 10:15 AM
Post-Ride Nutrition
04-03-2025 02:06 AM
🚴‍♂️ Saddle Up for the Belgian Waffle Ri...
04-03-2025 02:03 AM
Pre Ride Food Intake
04-03-2025 12:14 AM
SAVA Explorer 6061?
04-02-2025 03:31 PM
Zwift v Spin v Wahoo
04-01-2025 05:59 PM
Have you Ever Tried an Electric Bike?
04-01-2025 05:07 PM
Good Morning from SW Ohio
04-01-2025 07:32 AM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. GirishH
22 posts
no avatar 2. Flowrider
18 posts
no avatar 3. Jake1
12 posts
no avatar 4. meamoantonio
12 posts
no avatar 5. SPINMAN
8 posts