04-12-2013, 09:04 AM
I have a SRAM APEX 9 speed system (2 chainrings) 3 years old that has worked well until I took it apart to clean it. I put on a new chain too. Now in high range/low gear (crossing over) the chain jumps off the distal derailleur wheel, causing me to have to get off and reposition it. It is clear that the angle of the chain going from the big wheel on the cluster to the big chainring is causing this. It seems like the guides on the sides of roller wheel should be close enough to prevent the chain from jumping off. Did I put it back together incorrectly? Is the chain too short ? All opinions welcome.
[attachment=4071]
[attachment=4071]