How to adjust shock preload?

dhdallas · 03-15-2026, 10:06 AM

These are Noleen NR-1 shocks on an old Girvin ProFlex MTB. How do I get a grip on the preload adjuster? There is very little surface area & there are no notches for a typical spanner & a pipe wrench, vice grips, etc. which are sure to mar the springs if I can even get them in there to grip it. The working space on the fork shock is especially tight. See attachment photos. Thanks!

ReapThaWhirlwind · 03-17-2026, 08:42 PM

You see that thread?

Screw that thread in (clockwise) to compress the shock and increase the pretension.

10 Latest Posts
Should eBikers have to get an eBike lice... 10-22-2026 07:15 PM
How Bad Are E-bikes By You? 10-22-2026 07:11 PM
Our new review format – we'd like your f... 10-22-2026 06:59 AM
Which one should I pick? 10-21-2026 08:09 PM
Chain skips under heavy load when pedall... 10-21-2026 07:32 PM
New rider 10-21-2026 07:07 PM
Are 26" really dying out? 10-18-2026 07:38 PM
Using ChatGPT for training 10-18-2026 07:32 PM
2026 Garmin Edge 1050 - warranty 10-18-2026 09:34 AM
Catastrophic bicycle failures 10-16-2026 01:36 AM

Join BikeRide on Strava

Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom