Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.

New: Vitesse Signal Giveaway's Winner Announced


Installing brake lever hoods
#1
HELP
I am overhauling a 25 year old Scapin. By far the hardest, most frustrating part of the process has been installing new brake lever hoods. I cannot figure this out and I have already put a tear in one of the new hoods. I can't believe this is so frickin' hard.
I have removed the brake lever and cable from the handlebar.
I have released the cable from the calipers and from the brake lever so all I am working with is the lever and the hood (one of those common Cane Creek replacement hoods).
I am trying to slip the hood up the lever (held in) then up and over the handlebar mount. It just won't go no matter how much I muscle it. I've tried soap, talc, whatever to lubricate it. It will not go without what would seem like extreme force and tools to expand the hood larger and that does not seem like it should be necessary.
Can anybody please explain this or point me to something on the web which clearly explains this process. I have googled extensively and come up with nothing useful.
Thank you in advance for sparing me my sanity.

  Reply
#2
Only advice I can give is:<br />
- depending on the shape of the lever, some hoods are easier to put on from the 'front' meaning you slide it up the lever portion where your fingers go first, and some go on easier form the 'back', where they clamp to the bars.<br />
- if you're going from the front, I'd leave the levers clamped to your handle bar to make them easier to hold<br />
- on some levers, you can remove the 'lever' part from the body/clamp part. That might make it easier<br />
- soak the hood in hot water. This "may" soften up the rubber a little. Don't go too hot though.

  Reply
#3
Best way to replace the hoods are to take off the brake levers off the bike then they go on real easy then all you have to do is put them back on and line it up. I forget where I read this at they even show a pic on how to do it do a search on how to do this I know I saw it some place. But the way I am telling you will get the job done. I need a bigger work shop man I love working on bicycle sure helps time go by quick.
My dad always told me a Sledge a matic can fix any thing.
  Reply
#4
I had the same problem and destroyed one of my hoods. I was not able to take off the brake lever because they seem to be riveted in. I have dia-compe and the only hood that seemed to be available was dia-comp 287 aero hoods. I was able to get the second hood on successfully. Here's what I did.

I put the hood in boiling water to soften it up. I'm not sure if I needed to do this but it seemed to help. I will review the need to do this when I replace the hood I messed up. On the first hood, I destroyed it because I tried to stretch it out and pull it on. What I should have done was to fold/roll it against itself so it was in half, slide it up the lever portion, then stretch it over the rest of the brake. Even though it was doubled up, it was easier to stretch over the brake because it was only half as wide, subjecting the rubber to less overall stretch.

Hope this helps somebody else. Appreciate the original post as I searched the internet and couldn't find anything.
  Reply


Possibly Related Threads...
Thread
Author
Replies
Views
Last Post
 
3,670
09-01-2021, 05:11 PM
Last Post: Lemon
 
3,047
03-08-2020, 02:34 PM
Last Post: G_M
 
11,135
01-30-2016, 12:15 PM
Last Post: fishboy316
 
11,299
09-09-2015, 05:22 PM
Last Post: Painkiller

Forum Jump:

[-]
10 Latest Posts
How many bikes do you have now?
Yesterday 07:31 PM
Happy Holidays
Yesterday 07:25 AM
What was your favourite bicycle?
12-21-2024 12:33 PM
How to Trick out your Recumbent Tadpole ...
12-20-2024 09:47 AM
Energy gels for cycling
12-20-2024 06:53 AM
New , To me ..
12-20-2024 04:06 AM
need e-trike advice (wife knee surgery)
12-20-2024 03:58 AM
Looking for Recommendations: E-Trike for...
12-20-2024 03:55 AM
How often check or change mechanical dis...
12-20-2024 03:48 AM
Ketone Ester $$$
12-20-2024 01:54 AM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. Alexjohnson
41 posts
no avatar 2. GirishH
24 posts
no avatar 3. Flowrider
14 posts
no avatar 4. meamoantonio
12 posts
no avatar 5. Bweighmaster
9 posts