Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.


Rookie looking for help w/drivetrain compatibility (Shimano)
#1
Hi everyone,

Please forgive my ineducation in advance…I have done a few days research, however the more I read the more I am confused. The subject is, drivetrain replacements on an old MTB, specifically, compatibility between base level Shimano gear and different speed systems.

This is my steed - https://archive.trekbikes.com/us/en/2009/trek/3700#/us/en/2009/trek/3700/details

Before anyone says ‘bin it’, I know, but I’m very attached to it now.

I currently have the stock crankset, i.e. SR Suntour XCC-T208 48/38/28 170MM - https://www.srsuntour.us/products/nex-t208?variant=27528530371

(fully aware it is total rubbish).

Back freewheel replaced last year for this - https://www.decathlon.co.uk/shimano-tz21-7-speed-freewheel-bike-cassette-14x28-id_8063280.html

Back derailleur is stock 7-speed Acera, shifters are stock indexed 7speed Acera

Chain is aftermarket 5-8speed, replaced with the freewheel last year - https://www.decathlon.co.uk/kmc-z8-5-8-speed-bike-chain-id_699035.html

As you can probably tell, I am a low earner and therefore quite a cheap person. I’d like to replace my crankset/BB (both are making all sorts of racket and the chain rings are worn down), maybe with something ‘nicer’ second hand from ebay (or is this very risky for low end products?)

Questions:

- how interchangeable are Shimano series products? Acera / Altus / etc? I've come across the Shimano chart but it is thoroughly confusing

- how interchangeable are speeds between front and back, i.e., could I use a 9-speed crankset with my existing 7-speed system?

- would I spend lots of time trying to find a crankset compatible with my rear derailleur/freewheel, or should I bin the rear derailleur as well and change it?

- if the above true, I assume since I have a 7-speed indexed shifter, I would need to either replace the derailleur with a 7-speed, or, replace the shifter and 7 cog freewheel too in the case of say, an 8 or 9 speed shifter/derailleur?
  Reply
#2
If that is all you need is a crank and matching Bottom bracket you will be fine with most any 7,8,9 spd and still be able to use your chain, derailleurs and such.
There are two kinds of people in the world, "Those who help themselves to people, and those who help people!"
  Reply


Possibly Related Threads...
Thread
Author
Replies
Views
Last Post

Forum Jump:

[-]
10 Latest Posts
How do you stay comfortable on a winter ...
Yesterday 10:18 PM
Are 26" really dying out?
Yesterday 07:01 PM
Shortness of breath.
Yesterday 06:58 PM
With new technology your next e-bike cou...
11-17-2026 05:23 PM
Your next ebike could have two motors, b...
11-16-2026 07:09 PM
How Bad Are E-bikes By You?
11-16-2026 07:01 PM
Are you mainly into Mountain Biking, Roa...
11-16-2026 06:54 PM
Hatch Chiles Rule!
11-16-2026 05:29 PM
Wanted | Magura Louse or Julie rear
11-11-2026 04:03 AM
Should eBikers have to get an eBike lice...
11-09-2026 05:21 AM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. Flowrider
22 posts
no avatar 2. meamoantonio
11 posts
no avatar 3. Sidewinder
8 posts
no avatar 4. ReapThaWhirlwind
8 posts
no avatar 5. GirishH
8 posts