Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.


Any idea what could have happened to my rim?
#1
[Image: IMG_3671.jpg]
So today I got a flat tire (unrelated, it was a nail, extracted, repaired. All good) and when I pulled over to try to find what caused it, I noticed that my rim was rubbing the brakes the way it does when it's out of true because of a broken spoke.
The spoke is fine. It's the RIM that's been damaged, and that has damaged my calm some. I took it to my usual bike shop, guys are pros, figured they'd have an answer, no such luck. They gave me vague language about how it "looked like it had been hit pretty hard," and that they "see it all the time," but were unable to tell me WHY damage like that could occur, how I could prevent it from happening again, or whether it was something wrong with the rim. They even took pictures of the rim before they handed it back, one was clearly puzzled by it.
Worth noting is that I typically replace my own broken spokes, and true my own wheels; I've been doing it for decades and my proficiency is fair. I don't over-tighten my spokes, if anything my hand is gentle. But the spoke pictured is original to the wheel, so it's not like I over-torqued it with a spoke tool or anything. The spoke on the opposite end, as well as the ones on either side, are also original to the wheel.
Wheel is a Forté Terramax 26", brakes are rim brakes, rim was appx. 2 years old, many miles covered but all on street, all very cautious.
Just looking for answers here, anybody have any idea what could have caused this?
  Reply
#2
Wow. I have seen pictures of cracks forming at the spoke holes, but never seen one rip out completely. It is a weak spot in the rim. After two years (you might still have luck with the warranty? At least contact the manufacturer, you might be lucky.

As to the why, that is really hard to say. I know that some rims have limits for the spoke tension - but more importantly, for the maximum tyre pressure. Other than that: no idea. I tried to find out some specs, but no luck (only a quick google-ing, so...)
  Reply
#3
Thanks for the response! Nice to know that others are baffled too, will do my best to contact the manufacturer. Specs can be found Here.
  Reply
#4
That's a pretty bad failure. But I've seen rims fail like this quite a few times. There was likely some underlying weakness in the rim at that point. But there was probably some minor triggering shock. I've seen rims fail from hitting a good pothole, overtightening spokes, even from a tube blowing out. Hard to say exactly what "caused" the failure.

Certainly worth talking to the bike/rim manufacturer to see if they'll do anything for you. But I wouldn't assume it means anything more than 'you had a bad rim that failed'.
  Reply


Possibly Related Threads...

Forum Jump:

[-]
10 Latest Posts
Your next ebike could have two motors, b...
Yesterday 07:09 PM
How Bad Are E-bikes By You?
Yesterday 07:01 PM
Shortness of breath.
Yesterday 06:56 PM
Are you mainly into Mountain Biking, Roa...
Yesterday 06:54 PM
Hatch Chiles Rule!
Yesterday 05:29 PM
Are 26" really dying out?
11-11-2026 11:02 AM
Wanted | Magura Louse or Julie rear
11-11-2026 04:03 AM
Should eBikers have to get an eBike lice...
11-09-2026 05:21 AM
Hello All
11-06-2026 09:03 AM
I don't usually wear a bike helmet. Does...
11-06-2026 02:48 AM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. Flowrider
22 posts
no avatar 2. ReapThaWhirlwind
11 posts
no avatar 3. meamoantonio
11 posts
no avatar 4. GirishH
8 posts
no avatar 5. Sidewinder
8 posts