06-14-2014, 12:24 PM
Hi all,
I have a bit of a noise coming from the rear brake, it makes no noise whatsoever when moving it's only at a stand still when you hold the rear brake on tight and put some tension on to the pedal or if you try to push the bike forwards.
I have had everything apart and cleaned it all, the rotor has been off the wheel and cleaned and refitted everything, made sure there are no loose items.
I do not remember this happening on old alu kona frame, I have a carbon cube frame now.
My next move was going to fit some washers between the calliper and mount on the frame.
Anyone have any ideas please ???
I have a bit of a noise coming from the rear brake, it makes no noise whatsoever when moving it's only at a stand still when you hold the rear brake on tight and put some tension on to the pedal or if you try to push the bike forwards.
I have had everything apart and cleaned it all, the rotor has been off the wheel and cleaned and refitted everything, made sure there are no loose items.
I do not remember this happening on old alu kona frame, I have a carbon cube frame now.
My next move was going to fit some washers between the calliper and mount on the frame.
Anyone have any ideas please ???
![[-]](https://forums.bikeride.com/images/flatty/collapse.png "[-]")
