|
Possible to fit fork with 1" steerer to 1 1/8" head tube?
|
|
03-18-2009, 06:58 PM
Hello! I'm wondering if it's possible to find a headset for an 1 1/8" head tube that will accept a 1" threadless steerer.
Does anyone know if such a headset exists? Thanks! Todd
03-18-2009, 10:04 PM
Headset Reducers
These will go in the frame so you can use a 1" headset and 1" steerer on a 1-1/8" frame. There are probably headsets that do the reduction without need for the extra parts as well if you search.
03-19-2009, 02:44 PM
Thanks, Dave! I appreciate the link to Jenson, too. I'll do some searching now that I know some better terms to use.
-Todd
03-31-2012, 02:48 PM
Old thread, but i thought i'd Post for those still looking for a 1 1/8 steerer head for a 1" threaded frame.
http://www.flickr.com/photos/17534977@N00/sets/72157628195500205/ |
| Possibly Related Threads... | |||||
| Thread | Author | Replies | Views | Last Post | |
| Head Stem Replacement | mtcayman2700 | 0 | 3,170 |
06-17-2017, 08:39 PM Last Post: mtcayman2700 |
|
| 42mm Inside Diameter Head Tube | surveyorcam | 2 | 5,377 |
07-23-2014, 04:18 AM Last Post: surveyorcam |
|
| Determining headset, head tube and steerer diameter measurements | explodomac | 3 | 23,984 |
11-23-2010, 01:34 PM Last Post: JonB |
|
